2016-04-24, 10:16 PM
hi
thx e-sailing, the problem is solved now
My serial uart output is working as it should do (if you want a schematic just let me know)
I've used the solution in the link you gave in the previous post
, add the line
. Save and reboot! The GPIO UART now operates at the correct baud rate, and is available at
, and NOT
thx e-sailing, the problem is solved now
My serial uart output is working as it should do (if you want a schematic just let me know)
I've used the solution in the link you gave in the previous post
Code:
/boot/config.txt
Code:
core_freq=250
Code:
/dev/ttyS0
Code:
/dev/ttyAMA0