New OpenPlotter v0.10.0alpha release

[Littlechay]

Hi OP user,

We have published a new image:


http://www.sailoog.com/en/blog/download-...lpha-noobs

The bad news:

Signal K is suffering changes and they are affecting to most features of OpenPlotter. We have already rewrite some of them but others need still work. This is why this last image is still alpha.

The good news:

The main feature of this new image is a self-updating system. You will be able to apply all changes we are doing until you get an stable system without having to burn a new image: https://sailoog.gitbooks.io/openplotter-...ating.html

Thanks to all for your patience.

I have the new version running and have applied all updates. Now on 0.10.2 alpha

The networking seems bust. I can't open diagnostics in the NMEA0183 or Signal K tabs, or anywhere for that matter. 
My I2C sensors seem to have been recognised but not 1W
I have an I2C GPS hat and that is appearing on ttyS0. I did chmod on that to 666 as usual, 

but the odd thing is that if I do "cat ttyS0" I get a lost of messages "$GPTXT,01,01,01,NMEA unknown msg*58" - never seen that before. 

Chris

Please open a terminal, type openplotter and try to open a diagnostic window from openplotter interface. If the terminal returns an error paste it here.

An I2C GPS detected as serial? no much sense. I think you don't need to set 666, just add ttySO to NMEA 0183 tab and it should work.

HI,

Yes sorry I2C was a brain fart. It is a serial GPS on a HAT. ttyS0 is added to the 0183 tab. 

I ran OP from the command line as you suggested. I get no errors while the OP window is open, still can't get any of the diagnostics windows to open. 

Nothing useful appeared after I closed the OP window other than what I knew

Code:

Failed to open /dev/ttyS0: Permission denied
Failed to initialize Interface GPS