This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
New OpenPlotter v0.10.0alpha release
#24
(2017-04-26, 06:35 PM)abarrow Wrote: Regarding UART management, Adrian at Wegmatt (the creator of the dAISy Hat for RPI) has a nice little instruction on how to disable serial bluetooth connection on RPI3 and move it to GPIO:

Open a terminal window on your Raspberry Pi and execute the following commands:
1. wget https://github.com/itemir/rpi_boat_utils...rt_control
2. chmod +x ./uart_control
3. sudo ./uart_control gpio
4. sudo reboot now

I don't quite get what is going on but yes that releases ttyAMA0 and the GPS HAT appears there. I change my serial port in the NMEA 0183 tab of OP to ttyAMA0 and I have the serial port available after a reboot. All good. 

But I guess openplotter needs to test for RPi 3 and sort that out on install otherwise people are going to have trouble. 

thanks
Reply


Messages In This Thread
New OpenPlotter v0.10.0alpha release - by Sailoog - 2017-04-12, 05:48 PM
Now we are at version 11? - by abarrow - 2017-04-21, 03:05 PM
RE: Now we are at version 11? - by Sailoog - 2017-04-21, 05:22 PM
RE: Now we are at version 11? - by svtgd - 2017-04-21, 07:31 PM
0.11.2 - by svtgd - 2017-04-23, 10:50 PM
RE: New OpenPlotter v0.10.0alpha release - by Littlechay - 2017-04-27, 01:08 AM

Forum Jump:


Users browsing this thread: 4 Guest(s)