2023-06-14, 11:10 PM
Hi, I ran the i2cdetect command, and it returned the chip on x76. Checked and both chips are bme280. that's the good news. I tried again with the instructions you sent. Opened signalk in chromium and logged in as admin on the signalk server.then started the i2c setup.
. started i2c, Click approve, do the next steps. click apply. click refresh and get the you must approve the request message. it's not storing the approve request. did this multiple times, sometimes restarting the server. got nowhere. Tried every combination I could multiple times.
Had taken an old 24" monitor down, in case the small 7" screen was not showing everything. hooked it up, and repeated everything. same thing. no visible missing items, like a save button.
took multiple screenshots but forgot them.
it looks like signalk server is not storing the approval. Not sure why. Wondering what I could have missed. Or what I might not have set up in the initial installation. Wondering as i'm having problems in influxdb as well, all my signalk keys are setup, but cannot get any data.
is there a data connection in signalK I have to set up before the i2c? That has to be done for the actisense ntg-1 or other serial device. I am getting data from the network, as opencpn has the gps position, and get the data on signalk instrument panel. it's set to log data.
Thanks for your help,
Alan