2023-09-26, 10:39 AM
(2023-09-25, 10:55 AM)ironman Wrote: You might want to check off the items on signalk connection first at https://github.com/pypilot/workbook/wiki...k-zeroconf. To troubleshoot, disable the pypilot service, run pypilot at the prompt, and post the output here.
Here you will also find the following remark: "With regard to heel and pitch, these readings are affected by the compass heading offset that is set in the compass calibration screen. See https://forum.openmarine.net/showthread....2#pid17922. This effect makes the usability of pitch and heel somewhat non-universal." In other words: there is a big chance that pitch and heel are not usable because they are intermixed. What you need them for?
Think it's very close to being sorted, thanks hans-martijn!!
This post did it https://forum.openmarine.net/showthread....7#pid23717 though not managed get it saved to tinypilot yet.
Heel & pitch > " What you need them for? " - don't know yet
Though had it working before with pypilot on a Pi4 & logging, was interesting seeing when the fishing boats went out with a blip in the graphs as the wash rocked the boat in the anchorage. Might be handy to compare sail trim & speed to heel when reefing, or maybe a rough idea of sea state. I just love data, sometimes you find things in the plots that are useful but unexpected.
THANKS GUYS!!
