2023-11-20, 04:40 PM
(This post was last modified: 2023-11-20, 04:57 PM by baltika_no_9.)
(2023-11-20, 11:59 AM)tommaso.avavel Wrote: After enable the logs where should I be able to see them?
You define the directory where you want the logs to be placed in the server configuration page, see below e.g. /home/pi/logs/
(2023-11-20, 11:59 AM)tommaso.avavel Wrote: Enable logging in sk for the NKE Logs.
Why do you need this NKE, SK could send the UDP Data also hisself.
First of all thank you for your time. I tried also from the USB and the result was the same.
Regarding this: "Why do you need this NKE, SK could send the UDP Data also hisself."
If you tried with a USB device then presumably you set up that device in the Openplotter Serial page? If that's the case then you should not add another data connection (your nke connection) separately in signal K for the data. You should delete that data connection.