2023-12-08, 11:10 PM
(2023-12-08, 11:07 PM)Jodel Wrote:(2023-12-08, 10:37 PM)Techstyle Wrote:(2023-12-08, 08:19 PM)Jodel Wrote:(2023-12-08, 04:54 PM)Techstyle Wrote:I have the plug-in installed and selected navigation.courseGreatCircle.nextPoint.estimatedTimeOfArrival(2023-12-08, 01:58 AM)SCarns Wrote: ETA, yes, but TTG, I don't see it. I hope I'm wrong. Unless it's part of "Course DTG, XTE, BRG, etc (based on courseGreatCircle.nextPoint / previousPoint)". Perhaps I'll dig into Scott's code on GitHub and see if TTG is in there.
I wrote the ETA calc code, if you define what you want I can add it?
it is just text so KIP doesn't handle it well, but it works.
The SignalK data browser is showing the data but as the boat is on the marina, there is no SOG, so data is just --
In Kip it does not appear in the drop down for the path but I typed it in manually. However I did not realise that it was only txt and chose time.
It would be nice if Kip could display in addition to ETA at next waypoint also Time to go. Similar for time to go to end of route and ETA there.
Thanks Jodel
So:
Next Point
Time of Arrival at next Point (an actual time of arrival eg. 19:37)
Time to the next point (Hours remaning, eg. 8:52 - 8hrs and 52mins)
Route
Time of Arrival
Time to Arrival
is that what you were thinking?
Exactly. It is the kind of information, particularly in coastal cruising that is very nice to know.
Also I think that KIP does not display the Path of derived data in the drop downs when configuring the data to display.
I have it working in KIP for ETA, you just have to set it up as text first