Have you add a connection in Opencpn to send the Autopilot data to kplex?
It should be something like this (Net 127.0.0.1:10110 1 UDP Output In:None, Out: None)
to send the Autopilot data from opencpn to kplex.
and in .kplex.conf you should have something like this
"
###end of OpenPlotter GUI settings
###Manual settings
[serial]
name=ap
direction=both
ifilter=+GP***:+EC***
optional=yes
filename=/dev/ttyOP_AP
baud=4800
"
The filter is very important. Otherwise all data is pushed into low speed communication.
It should be something like this (Net 127.0.0.1:10110 1 UDP Output In:None, Out: None)
to send the Autopilot data from opencpn to kplex.
and in .kplex.conf you should have something like this
"
###end of OpenPlotter GUI settings
###Manual settings
[serial]
name=ap
direction=both
ifilter=+GP***:+EC***
optional=yes
filename=/dev/ttyOP_AP
baud=4800
"
The filter is very important. Otherwise all data is pushed into low speed communication.