2018-04-05, 11:56 PM
(2017-09-19, 09:07 AM)Sailoog Wrote: Good work kste. kplex is a versatile software but we need to keep openplotter simple for beginners. If we would have included all kplex features that would have been not possible. So we added the "advanced" option to directly editing the kplex.conf file. From your experience we can learn that we should improve the advanced integration. Personally I think we should not allow graphical edition for advanced parameters and show them as "advanced" label and open kplex.conf when you try to edit them graphically. I would try to keep the disable option at least. Thanks for reporting.
I will make this post sticky.
I'm struggling with the same issue. I have openplotter running on one PI (pi1) and on another PI (pi2) KPLEX is running. On Pi 1, I have my new (opto isolated) USB to 4 port serial interface connected getting GPS and Gyro on two serial ports. On Pi 2 I have a software running that uses a virtual serial port (PTY). I can send NMEA from openplotter to Kplex and the data is available on the virtual port, problem is that the NMEA that is send from the virtual port doesn't arrive at openplotter.