2020-06-04, 12:35 PM
Hi, I changed my EspEasy now from UDP to MQTT for the moment. My OP/SK2 seems to freeze when using UDP?
See images for values/examples.
Very simple, how to do it:
1. Setup OP and SK as always
2. Add Sk/MQTT addon
3. In EspEasy, add a openhab MQTT controller:
4. Add connection to OP server
5. Set topic to vessels/self/%valname%, this set correct topic according to signalk spec, if the device has correct valuename
6. Add Last Will =LW info if you like, don,t needed, but good for debug issues.
7. Add a device:
NB! Temperature is in Kelvin, therefore tempvalue + 273.15
8. Connect the device to correct controller, nr 1 in my example.
9. Take a look in SignalK server and enjoy!!
Now you can just add more devices, with correct SignalK path, then all will work directly!
In EspEasy, you can go to Tools: Log to see what and when devices are used. Also, go to Tool:System Variables, to check what variable names you can use.
Start using both an ESP32 with own code and EspEasy to my OP/SK server.
Good luck!
/Leif
See images for values/examples.
Very simple, how to do it:
1. Setup OP and SK as always
2. Add Sk/MQTT addon
3. In EspEasy, add a openhab MQTT controller:
4. Add connection to OP server
5. Set topic to vessels/self/%valname%, this set correct topic according to signalk spec, if the device has correct valuename
6. Add Last Will =LW info if you like, don,t needed, but good for debug issues.
7. Add a device:
NB! Temperature is in Kelvin, therefore tempvalue + 273.15
8. Connect the device to correct controller, nr 1 in my example.
9. Take a look in SignalK server and enjoy!!
Now you can just add more devices, with correct SignalK path, then all will work directly!
In EspEasy, you can go to Tools: Log to see what and when devices are used. Also, go to Tool:System Variables, to check what variable names you can use.
Start using both an ESP32 with own code and EspEasy to my OP/SK server.
Good luck!
/Leif