(2019-10-31, 03:31 PM)Max1947 Wrote: (2019-10-30, 05:26 PM)Sailoog Wrote: Updated the first post with a new img and NOOBS pre-release with OpenPlotter Settings, OpenCPN and Signal K pre-installed and configured.
You can already translate those apps into your language here: https://crowdin.com/project/openplotter
Closer to the final release 
Hi Sailoog, you can't log in to SignalK, are you updating the server or am I missing something?

Installed the release image on my RPI3b+. Everything i use seems to work very well. Installed myself Synaptic to get the OpenCPN plugins like Oesenc pluigin. Oesenc chart set with the USB dongle works also verry well. MxTommy goes. There was a problem with the SignalK external server this afternoon. But later it was later solved and I was able to get MXTommy.
My GPSmouse is also working with an entry in SignalK.
Switched on the OpenGL driver in raspi-config.
Then I liked to try the completed same SD card in my RPI4. But that did not work. System does not start. At first i get an error, then the booting stops:
systemd-fskl@dev-disk-by\x2dpartuud-9488f0/a\x2d01.service.
I will make another SD and use this only in the RPI4 and sees if it works.
Everything looks and feels good. I'am only missing the original desktop of the beta.
NMEA2K not tried, But is allready in the winter storage.
Regards,
Bram