Posts: 42
Threads: 3
Joined: Nov 2019
Reputation:
4
Happy new year!
Whats the current MCS status, can I purchase one of the HW platforms to start experimenting perhaps?
Jeanneau Sun Odyssey 42.2 - All Openplottered and hooked up on online.
Posts: 181
Threads: 4
Joined: May 2018
Reputation:
28
Hi flybob,
I have ordered boards and they should delivered until weekend. Then I must check again. I think you can buy one shortly....
But I do not know when the app added to OP....
Posts: 181
Threads: 4
Joined: May 2018
Reputation:
28
Hi Max...
Yes. The only one is changed is the adress of the third SC16is752. If you want to have a new one I send it to you…
Posts: 42
Threads: 3
Joined: Nov 2019
Reputation:
4
Hi!
About to place the order for the MCS, and the Analog sensor board.
Is it 0-10 or 0-20v now? You mentioned it was going to be increased range but says 0-10 on your shop...
Jeanneau Sun Odyssey 42.2 - All Openplottered and hooked up on online.
Posts: 181
Threads: 4
Joined: May 2018
Reputation:
28
Hi,
At the moment I finalize the Sensor board. The Analog input is then 0-20V.
But it need a little time until it´s in the shop. I think I order them in the next week and then it needs round about 2 weeks until it´s here….
Posts: 42
Threads: 3
Joined: Nov 2019
Reputation:
4
Ready to order, sir!
Need the MCS and might as well add some sensor boards while I'm at it. Got OP2 up and running now with plenty of nice setting, time to move aboard now.
Is there any way of getting an amp-meter in place? Would be lovely to see the consumption, perhaps through some i2c/1w connected meter?
Jeanneau Sun Odyssey 42.2 - All Openplottered and hooked up on online.