Posts: 181
Threads: 4
Joined: May 2018
Reputation:
28
Hi,
all ordered packages are on their way. Sorry for the delay.
Now are enough in stock... ;-)
@max:
I send it to you next time... ;-)
Posts: 21
Threads: 2
Joined: Feb 2019
Reputation:
0
Hi Thomas
Are you able to send the server board to Australia yet?
Bill
Posts: 181
Threads: 4
Joined: May 2018
Reputation:
28
Hi Bill,
i have add Australia (Australien in German) to the shipping targets on the website.
Shipping cost is a little bit higher... :-( (48€)
Don´t know how long the shipping needs in the Moment. I send out parts in 1-2 days...
Posts: 42
Threads: 3
Joined: Nov 2019
Reputation:
4
I got the board yesterday, finally! Mounted in in the boat and tried to boot up - nothing. However seems like the ribbon cable was a bit loose which was fixed at home later. So now it's booting and should work just fine.
However - the Moitessier hat cannot be mounted without an extra pin head and it's quite tricky to come by actually! Not a lot of places ship to Sweden these days so I've been hunting online for a couple of hours(!) for something as simple as a gpio duplicator with reasonable shipping time. Would be a great accessory to your shop glowntiger
Jeanneau Sun Odyssey 42.2 - All Openplottered and hooked up on online.
Posts: 68
Threads: 11
Joined: Apr 2020
Reputation:
2
Please forgive me. I've reviewed the first few and last few pages and this looks very promising. Can the OP please update the first post, or provide a link to where the most up-to-date information about this project seen.