This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
1w sensor
#1
Hi All
I just got my hands on a 1W temperature sensor and wanted to perhap fit it to the engine.
I wasnt able to find any 1W documentation in the current manual (before I make magic smoke and break something else!)

I did find an old github article from Sailoog here: https://github.com/sailoog/openplotter-d...-sensor.md

But the link here to the chapter in the manual is 404....

Am I missing something?

Thanks very much
JFJ
Reply
#2
You need to use the OpenPlotter GPIO app. Sorry, the current documentation is not complete but you can have an idea of the connection to avoid magic smoke: https://openplotter.readthedocs.io/en/2....o_app.html
Reply
#3
(2022-01-18, 08:48 PM)Sailoog Wrote: You need to use the OpenPlotter GPIO app. Sorry, the current documentation is not complete but you can have an idea of the connection to avoid magic smoke: https://openplotter.readthedocs.io/en/2....o_app.html

Thanks Sailoog
When I fit I will take a few pics and see if I can update the manual.

Regards
Finbar
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)