Posts: 4
Threads: 0
Joined: Aug 2018
Reputation:
0
After installing Openplotter 3 and Opencpn 5.6 flatpak via Openplotter 3, Opencpn does not start.
also if I try it via the tereminal : flatpak run org.opencpn.OpenCPN
invalid MIT-MAGIC-COOKIE-1 key15:22:44: Error: Unable to initialize GTK+, is DISPLAY set properly?
In the Check system app I see the following error:
Checking OpenCPN... | running | | FP fullscreen autostart enabled
↳Unable to read OpenCPN FP configuration
What could be causing this problem ?
Posts: 4
Threads: 0
Joined: Aug 2018
Reputation:
0
Hi,
I have installed Openplotter 3 and from there installed OpenCpn 5.6 Flatpak
When I start it through open plotter or via terminal (flatpak run org.opencpn.OpenCPN) I get the following response :
Invalid MIT-MAGIC-COOKIE-1 key15:22:44: Error: Unable to initialize GTK+, is DISPLAY set properly?
If I do a startup check, I get :
Checking OpenCPN... | running | | FP fullscreen autostart enabled
↳Unable to read OpenCPN FP configuration
So the problem is OpenCpn does not start up at the screen, what could be the cause of this problem ?
Posts: 3,025
Threads: 63
Joined: Mar 2016
Reputation:
284
2022-04-24, 06:36 PM
(This post was last modified: 2022-04-24, 06:38 PM by Sailoog.)
have you changed the user name of your system after installing opencpn with flatpak?
Are you in a headless system?
Try this:
sudo flatpak run org.opencpn.OpenCPN
or try to uninstall and reinstall.
Posts: 175
Threads: 15
Joined: Jun 2017
Reputation:
6
Do you have the Avnav enabled? OpenCPN FP & Avnav do not seem to play together well. OpenCPN FP will not open with Avnav enabled.
Updated Avnav a few days back and it auto enabled on me. It had me chasing my tail for a bit.
Posts: 62
Threads: 0
Joined: Jan 2020
Reputation:
2
(2022-04-25, 12:14 AM)Opie91 Wrote: Do you have the Avnav enabled? OpenCPN FP & Avnav do not seem to play together well. OpenCPN FP will not open with Avnav enabled.
Updated Avnav a few days back and it auto enabled on me. It had me chasing my tail for a bit.
would be interesting to get some more info on that.
Normally they should not interfere at all.
Posts: 6
Threads: 0
Joined: Apr 2022
Reputation:
0
Hey,
I installed OpenPlotter 3 on my raspi 4. After some configurations, I can't open the openplotter-network. This is the result Trace:
openplotter-network
Traceback (most recent call last):
File "/usr/bin/openplotter-network", line 11, in <module>
load_entry_point('openplotterNetwork==3.1.2', 'console_scripts', 'openplotter-network')()
File "/usr/lib/python3/dist-packages/openplotterNetwork/openplotterNetwork.py", line 975, in main
MyFrame().Show()
File "/usr/lib/python3/dist-packages/openplotterNetwork/openplotterNetwork.py", line 85, in __init__
self.pageClient()
File "/usr/lib/python3/dist-packages/openplotterNetwork/openplotterNetwork.py", line 863, in pageClient
self.read_wlan()
File "/usr/lib/python3/dist-packages/openplotterNetwork/openplotterNetwork.py", line 899, in read_wlan
self.client_bitRate1.SetValue(self.find_line_split_set2(wlan_info,"Rate","=",1).split(" ")[0])
AttributeError: 'NoneType' object has no attribute 'split'
Posts: 175
Threads: 15
Joined: Jun 2017
Reputation:
6
(2022-04-25, 01:06 PM)wellenvogel Wrote: (2022-04-25, 12:14 AM)Opie91 Wrote: Do you have the Avnav enabled? OpenCPN FP & Avnav do not seem to play together well. OpenCPN FP will not open with Avnav enabled.
Updated Avnav a few days back and it auto enabled on me. It had me chasing my tail for a bit.
would be interesting to get some more info on that.
Normally they should not interfere at all.
Do not know what to say. Just it has been my experience that they OpenCPN FP will not open with the Avnav service running.
I have turned Avnav service on/off and it is definitely repeatable.
Posts: 62
Threads: 0
Joined: Jan 2020
Reputation:
2
(2022-04-26, 05:13 PM)Opie91 Wrote: (2022-04-25, 01:06 PM)wellenvogel Wrote: (2022-04-25, 12:14 AM)Opie91 Wrote: Do you have the Avnav enabled? OpenCPN FP & Avnav do not seem to play together well. OpenCPN FP will not open with Avnav enabled.
Updated Avnav a few days back and it auto enabled on me. It had me chasing my tail for a bit.
would be interesting to get some more info on that.
Normally they should not interfere at all.
Do not know what to say. Just it has been my experience that they OpenCPN FP will not open with the Avnav service running.
I have turned Avnav service on/off and it is definitely repeatable.
Do you have some logs (e.g. OpenCPN log)?
And what is the error?
Does OpenCPN not come up? Does it crash?
Is it unable to display some charts?
Can you try to start from the command line?
Posts: 3,025
Threads: 63
Joined: Mar 2016
Reputation:
284
2022-04-26, 06:57 PM
(This post was last modified: 2022-04-26, 07:11 PM by Sailoog.)
(2022-04-16, 02:06 PM)Hobo Wrote: Hi,
I have installed Openplotter 3 and from there installed OpenCpn 5.6 Flatpak
When I start it through open plotter or via terminal (flatpak run org.opencpn.OpenCPN) I get the following response :
Invalid MIT-MAGIC-COOKIE-1 key15:22:44: Error: Unable to initialize GTK+, is DISPLAY set properly?
If I do a startup check, I get :
Checking OpenCPN... | running | | FP fullscreen autostart enabled
↳Unable to read OpenCPN FP configuration
So the problem is OpenCpn does not start up at the screen, what could be the cause of this problem ?
I have been able to reproduce this error. It happens when using OpenPlotter headless. This is my error:
Code: (opencpn:2): Gdk-ERROR **: 18:54:58.144: The program 'opencpn' received an X Window System error.
This probably reflects a bug in the program.
The error was 'BadAccess (attempt to access private resource denied)'.
(Details: serial 380 error_code 10 request_code 130 (MIT-SHM) minor_code 1)
(Note to programmers: normally, X errors are reported asynchronously;
that is, you will receive the error a while after causing it.
To debug your program, run it with the GDK_SYNCHRONIZE environment
variable to change this behavior. You can then get a meaningful
backtrace from your debugger if you break on the gdk_x_error() function.)
I have reported this to OpenCPN devs, thanks for notifying: https://github.com/OpenCPN/OpenCPN/issues/2628
Posts: 3,025
Threads: 63
Joined: Mar 2016
Reputation:
284
(2022-04-26, 12:34 PM)jtaraskin Wrote: Hey,
I installed OpenPlotter 3 on my raspi 4. After some configurations, I can't open the openplotter-network. This is the result Trace:
openplotter-network
Traceback (most recent call last):
File "/usr/bin/openplotter-network", line 11, in <module>
load_entry_point('openplotterNetwork==3.1.2', 'console_scripts', 'openplotter-network')()
File "/usr/lib/python3/dist-packages/openplotterNetwork/openplotterNetwork.py", line 975, in main
MyFrame().Show()
File "/usr/lib/python3/dist-packages/openplotterNetwork/openplotterNetwork.py", line 85, in __init__
self.pageClient()
File "/usr/lib/python3/dist-packages/openplotterNetwork/openplotterNetwork.py", line 863, in pageClient
self.read_wlan()
File "/usr/lib/python3/dist-packages/openplotterNetwork/openplotterNetwork.py", line 899, in read_wlan
self.client_bitRate1.SetValue(self.find_line_split_set2(wlan_info,"Rate","=",1).split(" ")[0])
AttributeError: 'NoneType' object has no attribute 'split'
what configurations? manual network configurations or configurations through the openplotter interface?
Try uninstalling openplotter-network app from settings and reinstalling again.
|