2022-09-11, 11:51 PM
(This post was last modified: 2022-09-12, 04:37 PM by Erikblade.
Edit Reason: Add info
)
First of all, thank you for the work done so far.
Second, excuse me for my poor English.
I intend to create an alarm so that in the event that a water leak occurs while I am away from the ship, I can receive a warning.
I have done my tests with python and a telegram bot and it seems that the system works correctly.
The problem has arisen when I want to implement it.
I have an arduino with a variety of sensors that collect different data and pass it to openplotter (signal k) via USB.
what I would need is for the script to be able to receive/read certain data (in this case the state of a level switch) from the signal k server and, if it is activated, send me a message via telegram to alert me of the situation.
I have the script code fully developed but I am missing the part of importing the necessary data from signal k and if there is any type of configuration to be carried out in signal k or openplotter to establish said communication.
It goes without saying that in my case it is only a bilge water level sensor but more can be added (temperature, intrusion, presence of gas, etc).
Thank you very much for your help.
I would gladly share the code with anyone interested.
I have seen a Signal k plugin, pdjr-skplugin-renotifier, that can do that i want, execute a script when an evento occurs, but It seems nota work correctly because i can't instalo It. Using openplotter v3 fully actualizated un a RPI4 8GB
Second, excuse me for my poor English.
I intend to create an alarm so that in the event that a water leak occurs while I am away from the ship, I can receive a warning.
I have done my tests with python and a telegram bot and it seems that the system works correctly.
The problem has arisen when I want to implement it.
I have an arduino with a variety of sensors that collect different data and pass it to openplotter (signal k) via USB.
what I would need is for the script to be able to receive/read certain data (in this case the state of a level switch) from the signal k server and, if it is activated, send me a message via telegram to alert me of the situation.
I have the script code fully developed but I am missing the part of importing the necessary data from signal k and if there is any type of configuration to be carried out in signal k or openplotter to establish said communication.
It goes without saying that in my case it is only a bilge water level sensor but more can be added (temperature, intrusion, presence of gas, etc).
Thank you very much for your help.
I would gladly share the code with anyone interested.
I have seen a Signal k plugin, pdjr-skplugin-renotifier, that can do that i want, execute a script when an evento occurs, but It seems nota work correctly because i can't instalo It. Using openplotter v3 fully actualizated un a RPI4 8GB