Posts: 129
Threads: 9
Joined: Apr 2017
in general it works any suggestion how to solve my problem? i need nginx webserver for a side project to play with virtual com ports over wifi? i wish to push my home automation directely into signal k
maybee its not related direct to openplotter but at a later point in openmarine to integrate internet of things
CREATING OPENPLOTTER CODE BACKUP...
APPLYING SETTINGS...
REMOVING UNUSED PACKAGES...
UPDATING PACKAGE LISTS...
W: Fehlschlag beim Holen von
http://ppa.launchpad.net/nginx/stable/ub...f/Packages 404 Not Found
E: Einige Indexdateien konnten nicht heruntergeladen werden. Sie wurden ignoriert oder alte an ihrer Stelle benutzt.
#### ERROR. ABORTING, PRESS ENTER TO EXIT ####
Posts: 68
Threads: 8
Joined: May 2017
Reputation:
0
Ive not had time to do another update, do you expect i2c sensors to work again now Sailoog?
Yesterday the imu was working bit i could not add i2c sensors, eg bmp180 was listed in the i2c window bur would not add?
Steve
Posts: 32
Threads: 2
Joined: Mar 2016
Reputation:
1
La I'm testing my MD9050 sensor (I think) and I do not recognize it in I2C. I have modified the file.
I have been able to configure another sensor but the measurements are not correct of pressure, and instead of the temperature appears the humidity.
The magnetic bearing and heel is well calibrated.
Sorry for my English
Saludos
Posts: 3
Threads: 1
Joined: Feb 2017
Reputation:
0
Hello,
With the version 14.2, if i try to add BMP180 in IC2 section, i have :
pi@openplotter:~ $ openplotter
RTIMU setting failed: [Errno 2] No such file or directory: '/home/pi/.config/openplotter/imu/settings/RTIMULib.ini'
There is no directory /imu in my directory '/home/pi/.config/openplotter/
Laurent
Posts: 16
Threads: 1
Joined: Aug 2017
Reputation:
0
I have updated to the latest version and the compass is working, but I am not able to calibrate it.
I am running headless, and when I press calibrate the remote desktop closes (both with RDP and VNC).
On the old calibration I was able to run the text based calibration. The old graphical calibration did not start with remote desktop, but it did not crash the connection. This is on a raspberry pi 3 with sensehat IMU-board, SDR AIS reciever and ublox GPS.
pi@openplotter:~ $ openplotter
Settings file RTIMULib.ini loaded
Using fusion algorithm RTQF
start cal process
pipe server on 2463
imu on 2465
Settings file RTIMULib.ini loaded
Using fusion algorithm Kalman STATE4
Using settings file RTIMULib.ini
IMU Name: LSM9DS1
min/max compass calibration not in use
Using ellipsoid compass calibration
Accel calibration not in use
LSM9DS1 init complete