Posts: 96
Threads: 17
Joined: Jul 2017
Reputation:
1
Hi!
Maybe the wrong forum but I just want to say thanks to those who have contributed to this version.
It now has support for pgn 129283 and 129284 which makes it possible to send nav data to an ap or a separate display. This will make my life (at least on my sailboat…) so much easier!
Thanks ever so much!
Cheers
P
Posts: 96
Threads: 17
Joined: Jul 2017
Reputation:
1
Hi,
The SK to nmea2000 takes SK data convert it and send it out on the nmea2000 bus. From what you write it seems you want to do the other way around.
But there's an app for that as well. It's named n2k-signalk and does just that.
Cheers
P
Posts: 22
Threads: 4
Joined: Apr 2023
Reputation:
1
Hi! I'm new to this and have zero programming knowledge. I have a Actisense NGT-1 USB successfully connected to OpenCPN on a Raspberry Pi. I am able to communicate from the NMEA 2000/SeaTalkinNG network to the PC and pass data from the boat transducers. I would like to go the other way too. From the Signal K data which includes GPS and AIS to the NMEA 2000 network so I can display this on my Raymarine i70s.
Does this plugin do the trick?
If so, can someone walk me step-by-step as to how to install the plugin?
Thank you in advance.
Posts: 22
Threads: 4
Joined: Apr 2023
Reputation:
1
I've made some progress on my own. I figured out I needed to install the Signalk-to-nmea2000 plugin and installed. I also configured the plugin and selected the data I wanted to send to the NMEA2000 network. In the Signal K dashword it says that the plugin has started. But I see no data coming through to the Raymarine SealTalkNG display i70s. I must be missing something.
Posts: 300
Threads: 4
Joined: Mar 2016
Reputation:
10
install it and also one for ais-to-n2k from sk appstore.
open sk plugins.
aktivate it and the pgns you want to get to n2k. but dont make an loop, aka send one which is allready n2k again.
good luck - holger
Posts: 300
Threads: 4
Joined: Mar 2016
Reputation:
10
2023-05-12, 08:08 PM
(This post was last modified: 2023-05-12, 08:10 PM by holgerw.)
Do you See The signak device from there?
Do do See neu data Output in signalk log?