2024-01-11, 07:27 PM
Hello All,
I am upgrading my system for the next sailing season:
-RPI 4b+
-Openplotter v3
-Pypilot 0.43 (upgraded using 'git clone https://github.com/pypilot/pypilot', followed by 'sudo python3 setup.py install')
I have an issue with the web control buttons when operated from a tablet (10.10.10.1:8000):
- I can activate the AP toggle and the actuator will operate if I move the IMU around
- The tack functions seem to work
- However, the adjustments buttons (-1, -10, +1, +10) do not seem to work for me and the command is not passed on to pypilot
If I access the Web Control interface through the Pypilot app in Openplotter directly, all controls work fine, including the adjustment buttons.
Pic of the tablet view of Pypilot Web Control - Adjustment buttons do not work:
Pic of the Web Control interface on RPI - Adjustment buttons do work:
Pic of the setup
The setup used to work in the previous versions, so I am not quite sure how to fix this.
Thanks for your help!
I am upgrading my system for the next sailing season:
-RPI 4b+
-Openplotter v3
-Pypilot 0.43 (upgraded using 'git clone https://github.com/pypilot/pypilot', followed by 'sudo python3 setup.py install')
I have an issue with the web control buttons when operated from a tablet (10.10.10.1:8000):
- I can activate the AP toggle and the actuator will operate if I move the IMU around
- The tack functions seem to work
- However, the adjustments buttons (-1, -10, +1, +10) do not seem to work for me and the command is not passed on to pypilot
If I access the Web Control interface through the Pypilot app in Openplotter directly, all controls work fine, including the adjustment buttons.
Pic of the tablet view of Pypilot Web Control - Adjustment buttons do not work:
Pic of the Web Control interface on RPI - Adjustment buttons do work:
Pic of the setup
The setup used to work in the previous versions, so I am not quite sure how to fix this.
Thanks for your help!