Posts: 3,038
Threads: 63
Joined: Mar 2016
Reputation:
289
Do not worry, those ICM-20948 modules are ready for 3.3V: "VDD operating range of 1.71V to3.6V"
I think your intermittent issues mean a previously damaged module or bad contact.
Posts: 2,356
Threads: 21
Joined: Jun 2016
Reputation:
75
it most likely sounds like a bad sensor
Posts: 208
Threads: 45
Joined: Mar 2017
Reputation:
2
(2024-04-25, 02:57 PM)seandepagnier Wrote: it most likely sounds like a bad sensor
I got a new ICM-20948 Sensor Module, installed on the MacArthur hat, and all is working perfectly!!
Is there any info on the LEDs on the Mid Power Motor Controller??
From L > R: AP = ON; Power = ON the next two both flash slow for nothing & fast for working - is this what should happen??
I can't get the AP in KIP to work yet - Wrong SK Path!!
Pi5 8GB, NVME SSD 512GB, MacArthur hat, OP4,
Posts: 2,356
Threads: 21
Joined: Jun 2016
Reputation:
75
flashing indicates data communication. If there is no movement the data is slower.
The white/blue led indicates engaged.
Posts: 208
Threads: 45
Joined: Mar 2017
Reputation:
2
(2024-05-10, 01:52 PM)seandepagnier Wrote: flashing indicates data communication. If there is no movement the data is slower.
The white/blue led indicates engaged.
Thanks Sean, I was just checking!
Pi5 8GB, NVME SSD 512GB, MacArthur hat, OP4,