Seatalk 1 on Raspberrry Pi 5 working

[Sailoog]

Thanks to Adrian (Wegmatt) who did some excellent coding work, we now have Seatalk 1 up and running on Raspberry Pi 5.

To use it on OpenPlotter v4.x.x, make sure you have at least these versions installed:

• Signal K sever 2.11.0
  
• openplotter-signalk-installer 4.2.0
  
• openplotter-gpio 4.2.10
  

The Seatalk 1 connector on the MacArthur HAT should now also work fine on the Raspberry Pi 5: https://macarthur-hat-documentation.read...atalk.html

Post here any issue please.

[Techstyle]

Thanks to Adrian (Wegmatt) who did some excellent coding work, we now have Seatalk 1 up and running on Raspberry Pi 5.

To use it on OpenPlotter v4.x.x, make sure you have at least these versions installed:

• Signal K sever 2.10.0
  
• openplotter-signalk-installer 4.2.0
  
• openplotter-gpio 4.2.8
  

The Seatalk 1 connector on the MacArthur HAT should now also work fine on the Raspberry Pi 5: https://macarthur-hat-documentation.read...atalk.html

Post here any issue please.

Awesome Job Guys!!

I was so happy to hear this, I went and installed my RPi5 on the boat:

[Sailoog]

ATTENTION an update to the latest kernel broke Seatalk1 on Raspberry Pi 5: https://github.com/SignalK/signalk-server/issues/1788

It has an easy fix but it has to be applied to new versions of the Signal K server and the openplotter-gpio app. We will publish here when it is solved.

[sebba]

Updating to SK 2.11 fixed the issue.
Thank you

[Sailoog]

Also updated openplotter-gpio to fix the same issue in digital and pulses features.

Make sure you have these apps updated:

• Signal K sever 2.11.0
  
• openplotter-signalk-installer 4.2.0
  
• openplotter-gpio 4.2.10