Instead of the 180 I opted to buy the new version the 280. On installing it on my PI 3 running .71 the first time I opened plotter on the I2C tab it showed it had detected MS5611 pressure sensor AND a humidity sensor which I do not have. Subsequent reboots only show the pressure sensor. I have pressure and temperature boxes ticked, but in inspector it shows only data for temperature and the pressure shows no data at all. The temperature is at 20 C and never moves.
I am seeing this as the data every second:
$OSXDR,C,20.0,C,I2CT*22
Everything else running great GPS AIS and charts. I have unplugged AIS and GPS but still same results
Any ideas please
I am seeing this as the data every second:
$OSXDR,C,20.0,C,I2CT*22
Everything else running great GPS AIS and charts. I have unplugged AIS and GPS but still same results
Any ideas please