2018-06-07, 08:08 PM
Good evening
regrettably my GPS USB-receiver is not recognized by actual Openplotters OpenCPN.
In the previous version all worked fine.
The system recognizes the receiver / see listing from lsusb
pi@openplotter:~ $ lsusb
Bus 001 Device 006: ID 1546:01a5 U-Blox AG NL-402U
Bus 001 Device 005: ID 0bda:8187 Realtek Semiconductor Corp. RTL8187 Wireless Adapter
Bus 001 Device 004: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. SMSC9512/9514 Fast Ethernet Adapter
Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp. SMC9514 Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
pi@openplotter:~ $
The device is Navilock NL-402U
In Openplotters previous version it could be found in the NMEA settings.
After activating per mouseclick and running diagnostics, the GPS data come in
and were used by OpenCPN.
In the new version there is no entry for this GPS device.
Who knows help_
Regards
Karl
regrettably my GPS USB-receiver is not recognized by actual Openplotters OpenCPN.
In the previous version all worked fine.
The system recognizes the receiver / see listing from lsusb
pi@openplotter:~ $ lsusb
Bus 001 Device 006: ID 1546:01a5 U-Blox AG NL-402U
Bus 001 Device 005: ID 0bda:8187 Realtek Semiconductor Corp. RTL8187 Wireless Adapter
Bus 001 Device 004: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. SMSC9512/9514 Fast Ethernet Adapter
Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp. SMC9514 Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
pi@openplotter:~ $
The device is Navilock NL-402U
In Openplotters previous version it could be found in the NMEA settings.
After activating per mouseclick and running diagnostics, the GPS data come in
and were used by OpenCPN.
In the new version there is no entry for this GPS device.
Who knows help_
Regards
Karl