Posts: 311
Threads: 46
Joined: Oct 2016
Reputation:
6
Hi, can you connect your pi to a LAN?
regards
Entschuldigung für mein Englisch. Es ist "deepl.com english"
PN bitte auf german.
Posts: 18
Threads: 1
Joined: Jun 2018
Reputation:
0
Can not connect to LAN. The only screen I have is on the one on bord.
Posts: 341
Threads: 0
Joined: Apr 2016
Reputation:
23
The update to V1.0.1/V1.0.2 wouldn' t help you to get both (ap and client) working on the internal Rpi3b+. When the raspbian firmware fixes this issue it could work. At the moment this mode does only work on the Rpi3b!!!
So you need an additional wlan stick to get a connection to the internet or you use your smartphone's wifi or GSM (connect it via usb to the raspberry pi and start tethering mode).
Posts: 18
Threads: 1
Joined: Jun 2018
Reputation:
0
Are you able to run VNC under 3B+?
I cannot get an connection (connection to network error) and wondering about, if it can be the same problem than with the WIFI connection to the marina.
I tried to connect from Ipad to the shown WIFI Network openplotter, got the Password window, filled in, sure it is right and get the failure.
Posts: 18
Threads: 1
Joined: Jun 2018
Reputation:
0
Or other question. Is there somebody who is able to user VNC with a PI 3B+? If yes, which version of the openplotter are you using?
Posts: 341
Threads: 0
Joined: Apr 2016
Reputation:
23
difference 3b /3b+
3b: 2.4 GHz only / working as AP and client (to get a better reach/speed I would prefer a usb wifi device freely positionable)
3b+: 2.4 GHz and 5 GHz / working as AP or as client
VNC does work on both. This is standard headless remote control used by many users.
Openplotter imagenetworki does use standard raspbian + standard raspbian modules (hostapd, dnsmasq, bridge-utils) thats all.
It doesn't overwrite individual settings (as 0.10-0.17 did) on every boot.
It doesn't use special network libraries (as 0.10-0.17 used network manager)
Your situation:
- you see openplotter AP on your ipad
- you are connected to openplotter ap
- you can open the signalk dashboard on the ipad (browser address 10.10.10.1:3000)
then you should be able to use realvnc
Posts: 18
Threads: 1
Joined: Jun 2018
Reputation:
0
I use Realvnc viewer on the ipad.
I see the WIFI openplotter in the configuration für WIFI on the ipad, but can not connect because wrong password or network failure.
On the PI I see only two blue arrows in the top and no wireless interface found. Can not connect to WIFI of Marina because of WIFI fealure in 3+ Firmware e-sailing told me.
On the Realvnc on the ipad I see only no computer. Whrere I can find signalk dashboard. When I fill in the IP in the browser it shows nothing, just tell me he can not connect to the internet.