Hi all,
I've got a bit of a problem and I hope some one might be able to help. It might be a bug or just me.
I'm running Openplotter 1.2.0 alpha, fresh from an updated img.
I am trying to display on Signal K instruments using MQTT data derived from ESP8266 connected temperature sensors.
I can connect a single MQTT topic and SignalK will create instruments and display data successfully (tempA).
I configure this on the MQTT tab of the OpenPlotter control panel.
As soon as I configure my second topic (tempB) the pi's CPU usage goes up to around 70%.
HTOP shows mqyy_d.py up at 130% cpu usage, the Signal K dashboard indicates 100+ deltas/sec.
As soon as I delete either topic everything settles down.
The mosquitto broker accepts the two topics with no problem, I can dedug with mosquitto_client.
(added) P.S. Node RED displays both topics OK so this might be a bug.
Any ideas?
I've got a bit of a problem and I hope some one might be able to help. It might be a bug or just me.
I'm running Openplotter 1.2.0 alpha, fresh from an updated img.
I am trying to display on Signal K instruments using MQTT data derived from ESP8266 connected temperature sensors.
I can connect a single MQTT topic and SignalK will create instruments and display data successfully (tempA).
I configure this on the MQTT tab of the OpenPlotter control panel.
As soon as I configure my second topic (tempB) the pi's CPU usage goes up to around 70%.
HTOP shows mqyy_d.py up at 130% cpu usage, the Signal K dashboard indicates 100+ deltas/sec.
As soon as I delete either topic everything settles down.
The mosquitto broker accepts the two topics with no problem, I can dedug with mosquitto_client.
(added) P.S. Node RED displays both topics OK so this might be a bug.
Any ideas?