2018-04-17, 12:39 AM
Thanks Saqqara and Jim !
Of course i am not giving up !
I am actually making some kind of progress too.
I have tried again connecting using a different RS232/USB and that seems to work better than the RS422 /USB adapter. The input is cleaner without any misread sentences. There are two problems i see at the moment:
- The autosetup still hangs until i briefly disconnect RS232 ... it is like it becomes hypnotized and freezes. After the disconnect it continues creating a selectable mapping ttyOP_UNDEF 4800 baud, direction in etc. If i now create an entry in the NMEA0183 tab (name it, select Port ttyOP_UNDEF, 4800 baud, IN, OK, Apply changes etc) i see no input in the diagnostic window for the newly created entry.
- If i use an RS232 with the mapping and loopbacks Didier propose in his article, my Instument freezes. With just Tx & Rx connected, no loopbacks it works fine.
This is like playing adventure game like MYST, strange and intriguing Puzzles every day! ....but sorta' fun.
/M
Of course i am not giving up !
I am actually making some kind of progress too.
I have tried again connecting using a different RS232/USB and that seems to work better than the RS422 /USB adapter. The input is cleaner without any misread sentences. There are two problems i see at the moment:
- The autosetup still hangs until i briefly disconnect RS232 ... it is like it becomes hypnotized and freezes. After the disconnect it continues creating a selectable mapping ttyOP_UNDEF 4800 baud, direction in etc. If i now create an entry in the NMEA0183 tab (name it, select Port ttyOP_UNDEF, 4800 baud, IN, OK, Apply changes etc) i see no input in the diagnostic window for the newly created entry.
- If i use an RS232 with the mapping and loopbacks Didier propose in his article, my Instument freezes. With just Tx & Rx connected, no loopbacks it works fine.
This is like playing adventure game like MYST, strange and intriguing Puzzles every day! ....but sorta' fun.
/M