2018-06-03, 12:10 AM
Thanks for the hint Paddy - Ok, so i tried Putty this time, and got a much better result:
$WIMWV,28,R,4.7,N,A*04
$WIMWV,28,R,4.7,N,A*04
$WIMWV,29,R,4.4,N,A*06
$WIMWV,30,R,4.2,N,A*08
$WIMWV,31,R,4.1,N,A*0A
$WIMWV,34,R,3.9,N,A*00
$WIMWV,35,R,3.8,N,A*00
$WIMWV,35,R,3.7,N,A*0F
$WIMWV,36,R,3.6,N,A*0D
$WIMWV,36,R,3.6,N,A*0D
$WIMWV,37,R,3.5,N,A*0F
$WIMWV,37,R,3.5,N,A*0F
$WIMWV,36,R,3.4,N,A*0F
$WIMWV,35,R,3.4,N,A*0C
$WIMWV,35,R,3.4,N,A*0C
$WIMWV,35,R,3.4,N,A*0C
$WIMWV,34,R,3.3,N,A*0A
$WIMWV,34,R,3.3,N,A*0A
$WIMWV,33,R,3.3,N,A*0D
$WIMWV,33,R,3.3,N,A*0D
$WIMWV,33,R,3.3,N,A*0D
$WIMWV,33,R,3.3,N,A*0D
$WIMWV,33,R,3.3,N,A*0D
$WIMWV,33,R,3.3,N,A*0D
$WIMWV,33,R,3.3,N,A*0D
$WIMWV,33,R,3.3,N,A*0D
$WIMWV,33,R,3.3,N,A*0D
$WIMWV,33,R,2.7,N,A*08
$WIMWV,33,R,2.3,N,A*0C
$WIMWV,33,R,1.9,N,A*05
$WIMWV,33,R,1.5,N,A*09
$WIMWV,33,R,1.3,N,A*0F
$WIMWV,33,R,1.1,N,A*0D
Here i see wind data (with decimals) and, as it looks, with the correct checksums - consistently ! (Must be something wonky with Hyperterminal or my setup)
So, if this is what the NASA Tactical wind sends when i am using a computer to diagnose the issue... why would this not be acceptable to OpenPlotter? It is also not exactly what i see in the auto-setup process - there the last checksum figure is truncated etc. (see my earlier posts)
It is also strange that the auto setup hangs when it enters the auto name creation, just stops/hangs until i remove the RS232 connector by which time it continues to create names etc.
/M
$WIMWV,28,R,4.7,N,A*04
$WIMWV,28,R,4.7,N,A*04
$WIMWV,29,R,4.4,N,A*06
$WIMWV,30,R,4.2,N,A*08
$WIMWV,31,R,4.1,N,A*0A
$WIMWV,34,R,3.9,N,A*00
$WIMWV,35,R,3.8,N,A*00
$WIMWV,35,R,3.7,N,A*0F
$WIMWV,36,R,3.6,N,A*0D
$WIMWV,36,R,3.6,N,A*0D
$WIMWV,37,R,3.5,N,A*0F
$WIMWV,37,R,3.5,N,A*0F
$WIMWV,36,R,3.4,N,A*0F
$WIMWV,35,R,3.4,N,A*0C
$WIMWV,35,R,3.4,N,A*0C
$WIMWV,35,R,3.4,N,A*0C
$WIMWV,34,R,3.3,N,A*0A
$WIMWV,34,R,3.3,N,A*0A
$WIMWV,33,R,3.3,N,A*0D
$WIMWV,33,R,3.3,N,A*0D
$WIMWV,33,R,3.3,N,A*0D
$WIMWV,33,R,3.3,N,A*0D
$WIMWV,33,R,3.3,N,A*0D
$WIMWV,33,R,3.3,N,A*0D
$WIMWV,33,R,3.3,N,A*0D
$WIMWV,33,R,3.3,N,A*0D
$WIMWV,33,R,3.3,N,A*0D
$WIMWV,33,R,2.7,N,A*08
$WIMWV,33,R,2.3,N,A*0C
$WIMWV,33,R,1.9,N,A*05
$WIMWV,33,R,1.5,N,A*09
$WIMWV,33,R,1.3,N,A*0F
$WIMWV,33,R,1.1,N,A*0D
Here i see wind data (with decimals) and, as it looks, with the correct checksums - consistently ! (Must be something wonky with Hyperterminal or my setup)
So, if this is what the NASA Tactical wind sends when i am using a computer to diagnose the issue... why would this not be acceptable to OpenPlotter? It is also not exactly what i see in the auto-setup process - there the last checksum figure is truncated etc. (see my earlier posts)
It is also strange that the auto setup hangs when it enters the auto name creation, just stops/hangs until i remove the RS232 connector by which time it continues to create names etc.
/M