This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CLOSED] CPU over 90% with gqrx V1.0
#1
Hello, everybody, 
I connected an RTLSDR dongle and started gqrx via sdr-Radio. As soon as the window opens, the CPU rises to over 90% and clear reception is not possible. 
Is this a bug or have I made a mistake under the thousand settings. 
I can receive voices and music from a regional radio station but only chopped off. I'm afraid it's the lack of processing power.
I can't tell if it was better in surgery 0.17 either. 
Greetings Jürgen
Angel  Entschuldigung für mein Englisch. Es ist "deepl.com english"
PN bitte auf german.  Big Grin
Reply
#2
(2018-06-01, 10:15 AM)Luckbert Wrote: Hello, everybody, 
I connected an RTLSDR dongle and started gqrx via sdr-Radio. As soon as the window opens, the CPU rises to over 90% and clear reception is not possible. 
Is this a bug or have I made a mistake under the thousand settings. 
I can receive voices and music from a regional radio station but only chopped off. I'm afraid it's the lack of processing power.
I can't tell if it was better in surgery 0.17 either. 
Greetings Jürgen

Hi Jurgen,

setting for RTL-DSR dongle is in Tools tab. And for the use of an RTL-DSR dongle you must use a powered USB hub. Because the Dongle uses too much power for the USB port.

Works great here.

nehmen Sie in Tools die RTL eingaben und nutzen Sie ein aktieve USB Hub. USB hat zu wenig Energie fur ein RTL-DSR.

Geht hier schon lange Zeit ohne Fehler.

Bram
Reply
#3
hi, 
It's not about the dongle itself. It's all right with that. Everything works great in AIS mode. 
It's about the tool GQRX. 
This tool seems to use a lot of CPU power.
Angel  Entschuldigung für mein Englisch. Es ist "deepl.com english"
PN bitte auf german.  Big Grin
Reply
#4
gqrx was always a resource hog.
scroll down to gqrx for settings
https://sailoog.gitbooks.io/openplotter-...eiver.html
Reply
#5
(2018-06-01, 11:37 AM)jim321 Wrote: gqrx was always a resource hog.
scroll down to gqrx for settings
https://sailoog.gitbooks.io/openplotter-...eiver.html

For some fun have a look here and go down to ADS-B Aircraft Tracking with Dump1090

https://ranous.files.wordpress.com/2018/...tv2-18.pdf

A quick compile and it worked straight away on 0.17. with just the rubbish little antenna which came with the dongle

Now watching some planes on a map at 10.10.10.1:8080

Cool
Reply
#6
Thanks for your help. Wink
I think I'm gonna keep listening to the radio normally with another device.
It uses a lot of CPU.
Maybe it'll get better later.
Greetings Jürgen
Angel  Entschuldigung für mein Englisch. Es ist "deepl.com english"
PN bitte auf german.  Big Grin
Reply
#7
i was looking in getting weather reports from vhf. but ran into the same problem with cpu load it made the pi unuseable for the most part.so i just use the vhf on the boat.
you can check this out for a further understanding.
http://gqrx.dk/download/gqrx-sdr-for-the-raspberry-pi
Reply
#8
I've got Linrad sort of working with a fun cube dongle pro plus, audio is stutter free but not sure how the program actually works yet..   But hopeful, would be great to automate receiving weatherfaxes offshore. Shame the RTL dongles don't go low enough to get Wfax. 


http://www.sm5bsz.com/linuxdsp/linrad.htm

[Image: mE00rR6.png]
Reply


Forum Jump:


Users browsing this thread: 2 Guest(s)