2018-06-26, 09:25 PM
(2018-06-26, 04:11 PM)jim321 Wrote: i dont understand what a register tab is.
in v 1.0 the usb tab is now serial, in wifi if you use onboard wifi you pick ap/client then after a APPLY and reboot go to the wireless icon and enter the marina's ap name password to connect..the range is limited with the onboard wifi.
you should give more info to get help rpi model version of op ect.
https://docs.sailoog.com/openplotter-v1-x-x/network
Thank you for the instruction. I changed like you showed in the screenshot to ap/client and applied and reboot but the WIFI symbol is not shown in the top of the screen where you put the arrow. It shows two arrows one up one down with description no wireless interfaces found.
I use the 1.0.0. (openplotter_v1.0.0_noobs zip) with an PI 3B plus.