Original version in French:
Je pense que ce soir je vais reprendre depuis le début en regardant la documentation Openplotter.
1 je vais télécharger la dernière version: OpenPlotter v1.0.0 NOOBS
2 Je formate ma carte SD avec SDFormatter V4
3 Après l'avoir dézippé, je fais un copier/coller (Ctrl C/Ctrl V) sur ma carte SD 32GB
4 Je place ma carte SD dans mon RPI3 et je branche mon RPI3.
En principe si j'ai tout compris, au bout d'un certain temps, openplotter devrait apparaitre à l'écran et là mes problèmes sont résolu. ;-)
English translation
I think tonight I'll start again from the beginning by looking at the Openplotter documentation.
1 I will download the latest version: OpenPlotter v1.0.0 NOOBS
2 I format my SD card with SDFormatter V4
3 After unzipping, I copy / paste (Ctrl C / Ctrl V) on my 32GB SD card
4 I put my SD card in my RPI3 and I plug my RPI3.
In principle if I understood everything, after a while, openplotter should appear on the screen and my problems are solved. ;-)
Je pense que ce soir je vais reprendre depuis le début en regardant la documentation Openplotter.
1 je vais télécharger la dernière version: OpenPlotter v1.0.0 NOOBS
2 Je formate ma carte SD avec SDFormatter V4
3 Après l'avoir dézippé, je fais un copier/coller (Ctrl C/Ctrl V) sur ma carte SD 32GB
4 Je place ma carte SD dans mon RPI3 et je branche mon RPI3.
En principe si j'ai tout compris, au bout d'un certain temps, openplotter devrait apparaitre à l'écran et là mes problèmes sont résolu. ;-)
English translation
I think tonight I'll start again from the beginning by looking at the Openplotter documentation.
1 I will download the latest version: OpenPlotter v1.0.0 NOOBS
2 I format my SD card with SDFormatter V4
3 After unzipping, I copy / paste (Ctrl C / Ctrl V) on my 32GB SD card
4 I put my SD card in my RPI3 and I plug my RPI3.
In principle if I understood everything, after a while, openplotter should appear on the screen and my problems are solved. ;-)