2018-08-12, 06:52 AM
(2018-07-03, 08:02 PM)jswalwell Wrote: I'd like to connect my openplotter data (position and AIS) to my ipad running Navionics. From what I've read Navionics listens to UDP port 2000 for nmea broadcasts.
I've tried to setup a UDP output under the NMEA 0183 setut tab, but using other plotting software that i know can connect via UDP I don't seem to be getting any UDP broadcasts out of openplotter. My version is 0.17.1.
I used UDP output, port 2000 and localhost as the IP. Doesn't work using 10.10.10.1 either. Checking using the diagnostic button shows data being generated. What am I doing wrong? Thanks!
Hi, with this settings Navionics works well with op, hope this will help
kplex.conf
[tcp]
name=out_nav
direction=out
optional=yes
mode=server
address=192.168.0.10
port=2000
[udp]
name=out_nav_udp
direction=out
optional=yes
device=wlan0
port=2000
Wifi:
wlan0 inet addr:192.168.0.10 Bcast:192.168.0.255 Mask:255.255.255.0
Wifi name: GoFree-5670
Also check that you generating correct NMEA messages for Navionics.