This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
OpenCPN output connections help
#1
I cannot get the basic OpenCPN connection Output settings to work properly
I can get data such as GPS and AIS into OCPN but when I try to follow a route the CPU utilization jumps to 100% and corrupted RMB sentences are sent and the Pi eventually hangs.
Ive tried settings as per the manual but that doesnt seem to work.

My OCPN config is as follows
Net, localhost:30330, Priority 1, TCP , Input , Filters:In None Out None
Net, localhost:10110, Priority 1, UDP , Output , Filters:In None Out Send RMB
My OP config is as follows
system UDP input on port 10110
signalK TCP output on port 30330

OpenPlotter ver 1.1.0 alpha
OpenCPN ver 4.8.6

You'll notice that I'm a Networking novice and Im sure this is pretty basic stuff but I cant get it !
Thanks
Reply
#2
Nice loop! Smile

Opencpn settings have to reject RMB otherwise you have a loop.
You shouldn't change input to port 30330 otherwise you can't read signalk generated nmea0183 sentences in opencpn.

Set opencpn settings to:

Net, localhost:10110, Priority 1, TCP , Input , Filters: In: Reject RMB Out: None
Net, localhost:10110, Priority 1, UDP , Output , Filters:In None Out: Send RMB
Reply
#3
That works!
eSailing I love you [emoji173]

Sent from my Moto G (4) using Tapatalk
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)