2021-05-10, 10:44 AM
(2021-05-10, 09:49 AM)Max1947 Wrote:(2021-05-09, 09:20 PM)PaddyB Wrote: Try this - click on "code" then dowenload the zip, unzip into a folder then with arduino IDE open constantCurrent.ino and should work. Might work..
Ciao PaddyB, is your project stopped? (https://github.com/boatybits/boatymonpy).
I have three / four cards left over to me if anyone is interested in having one, come forward. I've finished one, but as an incompetent, I can't go on.
More simple instructions would be needed to load the software and how to make the various connections ... in any case, good wind to everyone, always!
This is still getting fiddled with, I've just updated the beta2 branch to the latest code.
Slowly I'm looking at getting new boards made, maybe with an esp32 prosoldered on but definitely with rj45 sockets and little breakout boards so the wiring can be done much more tidy using off the shelf network cables rather than get everything back to the board.
I just started a very brief wiki on GIT about getting the code onto the ESP > https://github.com/boatybits/boatymonpy/wiki
Various settings can be changed in the config.py file.
Sorry, all a bit brief but the boat jobs list is never ending so better get on with that ?
Thanks for showing some interest, do report back how you get on, good luck!