This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
OPENCPN does not work at all in OPEN PLOTTER v1.0.0
#1
Hi everyone,
I have troubles making opencpn to work on my raspberrys.
I've tryed with the 1B without success.
Then, i've tryed with the raspberry 3b. No problem with ETCHER's img file.
I've also tryed to only install OPEN CPN on RASPBIAN with command lines, it works well but when i move the map with directionnal keys, the zoom plus shortcut does not work anymore since i reboot
I've bought a 2B cause i need my 3B for NESPI, the installation seems to complete without troubles but i can't load OPEN CPN ... Nothing happens.
I've tryed in the terminal : sudo opencpn and gets rhe error "segmentation fault"
Just after install, i've update and upgrade.
I would be greatfull if someone could help me with that.
Reply
#2
ask yourself which is more important, navigation or playing games.


https://opencpn.org/wiki/dokuwiki/doku.p...rrypi_rpi2

https://kingtidesailing.blogspot.com/201...ry-pi.html

opencpn site
http://www.cruisersforum.com/forums/f134/

buy another pi3??
run it on a laptop?
Reply
#3
The 3B is definitely the best for that. I think the 2 B has a hardware failure cause the upgrade process
Has been very very long.
I'll try with another SD beforesending it back to the seller.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)