2018-10-26, 03:04 PM
(2018-10-26, 02:09 PM)svbalachandra Wrote: I've got the latest Open Plotter Release on a Raspberry Pi 3B and so far so good. I've had trouble with the cheaper 2-pin Serial to USB connectors where they don't have a unique serial number, and for some reason assigning by port location forced the PI to choose only one (one of three) adapters to favor and ignore the other two. I only paid $4 for these cheap ch341 chipset adaptors, so I ditched two of them and bought a better quality Nextech serial to USB adaptor with the 5 wire pinout and TX/RX led indicators.
Are you sure? I tested this last spring, and I could have 3 or more arduinos (using ch341) assigned to different ports. It even works remembering which ports they are plugged to a hub.
Quote:an option under serial port direction for IN/OUT or BOTH - only IN or OUT but my adaptor is a BOTH type adaptor. How do I test out the datastreams on both the RX (IN) and TX (OUT) ports on my single send/recieve adaptor to make sure I've got connection and NMEA0183 data?Openplotter cannot control in or out, a serial port will have both. Can't you test it by seeing if it is working?