2019-02-14, 01:26 AM
Hi All,
I have an LSM303DLHC Sensor Acceleration and Compass.
According to the file RTIMULib.ini in /home/pi/pypilot the correct value for this sensor is IMUType 4.
The thing is when I configure this value by hand in the mentioned file and go to the pypilot tab in openplotter the sensor is correctly detected and displayed.
When I then change the pypilot status to IMU only and apply the change. The file RTIMULib.ini gets overwritten with a new value for IMUType = 13.
No matter what I tried so far the value gets reset to 13.
Is anybody having an idea what could be the cause of this behavior and how I can get it fix on type 4.
I use oppenploter v1.2
Kind regards,
didi
I have an LSM303DLHC Sensor Acceleration and Compass.
According to the file RTIMULib.ini in /home/pi/pypilot the correct value for this sensor is IMUType 4.
The thing is when I configure this value by hand in the mentioned file and go to the pypilot tab in openplotter the sensor is correctly detected and displayed.
When I then change the pypilot status to IMU only and apply the change. The file RTIMULib.ini gets overwritten with a new value for IMUType = 13.
No matter what I tried so far the value gets reset to 13.
Is anybody having an idea what could be the cause of this behavior and how I can get it fix on type 4.
I use oppenploter v1.2
Kind regards,
didi