2019-04-25, 02:22 PM
(2019-04-22, 02:32 PM)jim321 Wrote: sudo nano /home/pi/.config/openplotter/read_sensors_d.py
change "spi.open(0,1)" to "spi.open(0,0)". (line 437)
ctrl x y
no affects. I can to see values from ADC. But I can't to make convertation to real values. "value edit" button doesn't works. In version 1.0.0 it works normally, I can to see the convertation graph also. But version 1.2.0 doesn't works.