2019-05-04, 04:32 PM
Hello-
I have found a puzzling USB boot issue. System is a Raspberry Pi 3b+ OpenPlotter 1.2.0
First - my setup works fine if I boot from an SD card.
Next, I did the following:
I have found a puzzling USB boot issue. System is a Raspberry Pi 3b+ OpenPlotter 1.2.0
First - my setup works fine if I boot from an SD card.
Next, I did the following:
- Copied the SD card to a USB drive (it's using an mSata3-USB3 adapter, the x850)
- Edited /boot/cmdline.txt to change the boot location
- Edited /etc/fstab entries for the / and /boot partitions
- Strangely, boot fails part-way through when booting with just the USB drive connected. It starts, gets part way, and stops.
- I create a new FAT32-formatted SD card with only bootcode.bin on it, insert into Pi
- Boot succeeds and I get to the desktop.
- These issues are seen:
- Bluetooth unavailable
- Wifi unavailable (the country is still set in wpa_supplicant.conf)
- Sound/audio is unavailable
- Attached USB accessories cannot be used. This includes: keyboard, mouse, CAN-USB device