2019-10-29, 01:04 PM
(2019-10-20, 12:40 PM)glowntiger Wrote: The n2k connector has also 12v its recommend to your installation if you connect 12v or not. If there is another 12v power point in your n2k installation not use them if not you can power with it. I have also a 120ohm resistor with a jumper so you can use the bord as an end point. Nmea should work if it use normal nmea. Rs422/rs485 or rs232.. I know that a st60+ use not compatible level. But this should work. I make a schematic next days... ;-)
Hi, solved connection ... I just have to wait for Sailoog to insert your app into OpenPlotter.
However, as soon as you have instructions, let me have them or better publish them. Good work and good wind!
[img][/img]
[img][/img]