2020-05-11, 08:31 PM
There we go!
[dollar]IIHDM,180.,M
[dollar]IIHDT,181.,T
[dollar]IIHDG,180.,,,01.,E
[dollar]IIBWC,,,,,,,T,,M,,N,
I catch all the dollarsign hex's and also try to find nulls, seems like i don't get the nulls at least.
y = x.replace("\x00", "[null]")
z = y.replace("\x24", "[dollar]")
Now if only the Autopilot would send out the rest of the data he got over Seatalk (Wind, Depth, Speed etc) I would be happier...
Too bad I'm away from the boat while coding, can't press that "auto" button on the autopilot to make it talk about XTE etc!
It's always on my local network through VPN using the 4g modem on board, convenient to keep working from home.
If I turn off validation of checksum then SignalK gets the data.
A differential to single ended module could help me interface the Autopilot? Making the RS422 into 0/12v, correct?
[dollar]IIHDM,180.,M
[dollar]IIHDT,181.,T
[dollar]IIHDG,180.,,,01.,E
[dollar]IIBWC,,,,,,,T,,M,,N,
I catch all the dollarsign hex's and also try to find nulls, seems like i don't get the nulls at least.
y = x.replace("\x00", "[null]")
z = y.replace("\x24", "[dollar]")
Now if only the Autopilot would send out the rest of the data he got over Seatalk (Wind, Depth, Speed etc) I would be happier...
Too bad I'm away from the boat while coding, can't press that "auto" button on the autopilot to make it talk about XTE etc!
It's always on my local network through VPN using the 4g modem on board, convenient to keep working from home.
If I turn off validation of checksum then SignalK gets the data.
A differential to single ended module could help me interface the Autopilot? Making the RS422 into 0/12v, correct?
Jeanneau Sun Odyssey 42.2 - All Openplottered and hooked up on online.