Server Hardware for openplotter?

[glowntiger]

Niente, non funziona. Non ricevo ne trasmetto dati. In Candump non trovo niente. Ho collegato il filo blu e filo bianco proveniente dal Raymarine i60 agli ingressi can h e can l. Nessun conflitto. nessun dato. ne in OpenCPN ne in Signal K. E l'I60 dovrebbe visualizzare almeno la true wind ma non succede.....non gli arriva nessun dato.
Mi occorre una spegazione dettagliata per rpincipianti su come connettere lo strumento seatalk NG al MCS e come far andare i dati da MCS a signal K e a Opencpn.
Chiedo aiuto a Glowntiger. Ho un PCB che non mi serve a niente, per ora.

Nothing, it doesn't work. I do not receive or transmit data. In Candump I find nothing. I connected the blue and white wire coming from the Raymarine i60 to the can h and can l inputs. No conflict. no data. neither in OpenCPN nor in Signal K. And the I60 should at least display the true wind but it doesn't happen ..... no data arrives.
I need a detailed explanation for beginners on how to connect the seatalk NG instrument to the MCS and how to make the data go from MCS to signal K and Opencpn.
I ask Glowntiger for help. I have a PCB that I don't need for now.

Hi Niklun,
Sorry for the late repley.
you need to connect CanH, CanL and gnd as minimum. Have you the connection and displays at home for now? How is your jumper for the termination set? Can you make a drawing of your wiring? Spur, Backbone and Termination? How the devices are connected?
You have install the MCP2515 in the Openplotter CAN App?
Can you give me your config.txt: type: "nano /boot/config.txt" (without the " ;-)) and make a copie in a dokument to append...