2020-06-11, 02:08 AM
(2020-06-05, 11:39 AM) pid=\14155' Wrote:
(2020-06-04, 07:44 PM)niklun Wrote:(2020-06-03, 01:22 PM)glowntiger Wrote: Hi niklun,Yes, I have enabled the auto shutdown option. Now I don't trust. I turn off the RPI from software, not through MCS switch. But I'd like to turn it off at the switch. Is there any way to control the shutdown dynamics through the MCS switch? This to check if the times are correct.
do not know you exactly system setting....
Have you enable the autoshutdown mode in the MCS APP before you have use this mode as described in the Manual?
If you have not enable this widget, the pi stops hard... !!!
My system is composed of: RPI 4 - HAT Moitessier - MCS
Thanks
Yes,
if the shutdown enable is activ, shutdown via the 12V enable terminal. Then look if the Pi shuts down or not. The power of the pi shuts off after ca.:40s. Until then the pi have to shut down....
I had the shut down working on 2.1.6 or 2.1.7. I corrupted my install with a system update so I started from scratch. I now have 2.1.8 and the power button no-longer shuts the pi off. I've verified that the checkbox in the MCS app is checked for 'Enable Autoshutdown'.