Posts: 47
Threads: 1
Joined: Feb 2020
Reputation:
0
(2020-12-15, 12:48 PM)glowntiger Wrote: Hi,
so if I understand it right, you use the moitessier hat?
There are errors in your Log:
[ 14.717200] moitessier_processReqData - HEADER_payloadIsValid(...) failed
[ 14.760517] moitessier_processReqData - HEADER_payloadIsValid(...) failed
I cannot reproduce this issue but think there is something wrong with your moitessier HAT. ( I did not have a moitessier HAT)
Can you check without the Hat.
Can I take a look at your System with AD after this?
Yes, I have the HAT and until kernel 5.4.52 everything was perfectly fine. With 5.4.79 to which the HAT has also been updated, the error on the ttysc serial has been released. It's ok if you can check with AD yourself, but you need to tell me how to do the remote connection. Then I don't speak English, I write through Google translate. This afternoon after 17 Italian time I would be there.
Comet 1000 - Openplotter under construction
Posts: 181
Threads: 4
Joined: May 2018
Reputation:
28
Hi,
you find the anydesk installer in the app under support.
But first, can you check without HAT? I think it´s a problem with the Moitessier...
Posts: 47
Threads: 1
Joined: Feb 2020
Reputation:
0
(2020-12-15, 02:01 PM)glowntiger Wrote: Hi,
you find the anydesk installer in the app under support.
But first, can you check without HAT? I think it´s a problem with the Moitessier...
Hello,
I removed both the hardware and the software of Moitessier HAT. Restarted and nothing. The ttysc serials do not appear. I have installed Anydesk and am ready for your kind assistance. I thank you infinitely.
Comet 1000 - Openplotter under construction
Posts: 47
Threads: 1
Joined: Feb 2020
Reputation:
0
Sorry Thomas,
I solved the problem of the missing ttySC0-5 serial by re-installing the kernel 5.4.79. Perfect ? NO
Now I don't have the CAN0 connection (see pictures).
I also attach the -dmesg
Code: pi@openplotter:~ $ dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 5.4.79-v7l+ (dom@buildbot) (gcc version 8.4.0 (Ubuntu/Linaro 8.4.0-3ubuntu1)) #1373 SMP Mon Nov 23 13:27:40 GMT 2020
[ 0.000000] CPU: ARMv7 Processor [410fd083] revision 3 (ARMv7), cr=30c5383d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[ 0.000000] OF: fdt: Machine model: Raspberry Pi 4 Model B Rev 1.1
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] Reserved memory: created CMA memory pool at 0x0000000023c00000, size 64 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] On node 0 totalpages: 933632
[ 0.000000] DMA zone: 1917 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 163584 pages, LIFO batch:31
[ 0.000000] HighMem zone: 770048 pages, LIFO batch:63
[ 0.000000] percpu: Embedded 20 pages/cpu s49804 r8192 d23924 u81920
[ 0.000000] pcpu-alloc: s49804 r8192 d23924 u81920 alloc=20*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 931715
[ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=1440 bcm2708_fb.fbheight=900 bcm2708_fb.fbswap=1 smsc95xx.macaddr=DC:A6:32:63:28:68 vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=00fe0b43-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: mapped [mem 0x1ccc0000-0x20cc0000] (64MB)
[ 0.000000] Memory: 3539864K/3734528K available (10240K kernel code, 739K rwdata, 2816K rodata, 2048K init, 854K bss, 129128K reserved, 65536K cma-reserved, 3080192K highmem)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 31111 entries in 61 pages
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] random: get_random_bytes called from start_kernel+0x344/0x518 with crng_init=0
[ 0.000007] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
[ 0.000022] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
[ 0.000100] bcm2835: system timer (irq = 17)
[ 0.000776] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
[ 0.000792] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
[ 0.000808] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
[ 0.000821] Switching to timer-based delay loop, resolution 18ns
[ 0.001058] Console: colour dummy device 80x30
[ 0.001091] printk: console [tty1] enabled
[ 0.001143] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=540000)
[ 0.001164] pid_max: default: 32768 minimum: 301
[ 0.001315] LSM: Security Framework initializing
[ 0.001512] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.001535] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.002880] Disabling memory control group subsystem
[ 0.003007] CPU: Testing write buffer coherency: ok
[ 0.003512] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.004423] Setting up static identity map for 0x200000 - 0x20003c
[ 0.004644] rcu: Hierarchical SRCU implementation.
[ 0.005323] smp: Bringing up secondary CPUs ...
[ 0.006500] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.007833] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.009104] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.009261] smp: Brought up 1 node, 4 CPUs
[ 0.009278] SMP: Total of 4 processors activated (432.00 BogoMIPS).
[ 0.009291] CPU: All CPU(s) started in HYP mode.
[ 0.009303] CPU: Virtualization extensions available.
[ 0.010071] devtmpfs: initialized
[ 0.024543] VFP support v0.3: implementor 41 architecture 3 part 40 variant 8 rev 0
[ 0.024808] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.024836] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.026817] pinctrl core: initialized pinctrl subsystem
[ 0.027793] NET: Registered protocol family 16
[ 0.031828] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[ 0.032404] audit: initializing netlink subsys (disabled)
[ 0.032666] audit: type=2000 audit(0.030:1): state=initialized audit_enabled=0 res=1
[ 0.033837] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.033851] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.034179] Serial: AMBA PL011 UART driver
[ 0.037710] bcm2835-mbox fe00b880.mailbox: mailbox enabled
[ 0.060834] raspberrypi-firmware soc:firmware: Attached to firmware from 2020-11-30 22:12, variant start
[ 0.070850] raspberrypi-firmware soc:firmware: Firmware hash is ab1181cc0cb6df52bfae3b1d3fef0ce7c325166c
[ 0.124926] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1
[ 0.130007] vgaarb: loaded
[ 0.130476] SCSI subsystem initialized
[ 0.130710] usbcore: registered new interface driver usbfs
[ 0.130767] usbcore: registered new interface driver hub
[ 0.130935] usbcore: registered new device driver usb
[ 0.131266] usb_phy_generic phy: phy supply vcc not found, using dummy regulator
[ 0.133144] clocksource: Switched to clocksource arch_sys_counter
[ 0.892833] VFS: Disk quotas dquot_6.6.0
[ 0.892934] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.893097] FS-Cache: Loaded
[ 0.893335] CacheFiles: Loaded
[ 0.903946] thermal_sys: Registered thermal governor 'step_wise'
[ 0.904319] NET: Registered protocol family 2
[ 0.905054] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[ 0.905085] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
[ 0.905142] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.905210] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.905360] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.905394] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.905651] NET: Registered protocol family 1
[ 0.906390] RPC: Registered named UNIX socket transport module.
[ 0.906403] RPC: Registered udp transport module.
[ 0.906416] RPC: Registered tcp transport module.
[ 0.906429] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.906450] PCI: CLS 0 bytes, default 64
[ 0.908405] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
[ 0.910580] Initialise system trusted keyrings
[ 0.910812] workingset: timestamp_bits=14 max_order=20 bucket_order=6
[ 0.921725] FS-Cache: Netfs 'nfs' registered for caching
[ 0.922441] NFS: Registering the id_resolver key type
[ 0.922478] Key type id_resolver registered
[ 0.922492] Key type id_legacy registered
[ 0.922514] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.923668] Key type asymmetric registered
[ 0.923681] Asymmetric key parser 'x509' registered
[ 0.923874] bounce: pool size: 64 pages
[ 0.923925] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 0.924162] io scheduler mq-deadline registered
[ 0.924177] io scheduler kyber registered
[ 0.928176] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
[ 0.928200] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff]
[ 0.928271] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x0603ffffff -> 0x00f8000000
[ 0.928341] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x00bfffffff -> 0x0000000000
[ 0.985293] brcm-pcie fd500000.pcie: link up, 5 GT/s x1 (SSC)
[ 0.985616] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
[ 0.985635] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.985656] pci_bus 0000:00: root bus resource [mem 0x600000000-0x603ffffff] (bus address [0xf8000000-0xfbffffff])
[ 0.985714] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
[ 0.985984] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 0.989469] PCI: bus0: Fast back to back transfers disabled
[ 0.989699] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
[ 0.989847] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[ 0.990280] pci 0000:01:00.0: PME# supported from D0 D3cold
[ 0.993790] PCI: bus1: Fast back to back transfers disabled
[ 0.993850] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff]
[ 0.993874] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]
[ 0.993956] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 0.993981] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff]
[ 0.994296] pcieport 0000:00:00.0: enabling device (0140 -> 0142)
[ 0.994550] pcieport 0000:00:00.0: PME: Signaling with IRQ 55
[ 0.994939] pcieport 0000:00:00.0: AER: enabled with IRQ 55
[ 0.995274] pci 0000:01:00.0: enabling device (0140 -> 0142)
[ 0.995991] bcm2708_fb soc:fb: FB found 1 display(s)
[ 1.025202] Console: switching to colour frame buffer device 180x56
[ 1.031959] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 1440x900
[ 1.038562] iproc-rng200 fe104000.rng: hwrng registered
[ 1.038900] vc-mem: phys_addr:0x00000000 mem_base=0x3eb00000 mem_size:0x3ff00000(1023 MiB)
[ 1.039589] vc-sm: Videocore shared memory driver
[ 1.040162] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000
[ 1.052651] brd: module loaded
[ 1.065373] loop: module loaded
[ 1.066815] Loading iSCSI transport class v2.0-870.
[ 1.068895] libphy: Fixed MDIO Bus: probed
[ 1.069525] bcmgenet fd580000.ethernet: failed to get enet clock
[ 1.069546] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000
[ 1.069569] bcmgenet fd580000.ethernet: failed to get enet-wol clock
[ 1.069591] bcmgenet fd580000.ethernet: failed to get enet-eee clock
[ 1.069619] bcmgenet: Skipping UMAC reset
[ 1.083233] libphy: bcmgenet MII bus: probed
[ 1.163267] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus
[ 1.164312] usbcore: registered new interface driver r8152
[ 1.164392] usbcore: registered new interface driver lan78xx
[ 1.164452] usbcore: registered new interface driver smsc95xx
[ 1.164888] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 1.164924] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
[ 1.167396] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000003000000890
[ 1.168706] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 1.168725] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.168741] usb usb1: Product: xHCI Host Controller
[ 1.168757] usb usb1: Manufacturer: Linux 5.4.79-v7l+ xhci-hcd
[ 1.168771] usb usb1: SerialNumber: 0000:01:00.0
[ 1.169419] hub 1-0:1.0: USB hub found
[ 1.169528] hub 1-0:1.0: 1 port detected
[ 1.170100] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 1.170126] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
[ 1.170151] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
[ 1.170684] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[ 1.170701] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.170716] usb usb2: Product: xHCI Host Controller
[ 1.170731] usb usb2: Manufacturer: Linux 5.4.79-v7l+ xhci-hcd
[ 1.170746] usb usb2: SerialNumber: 0000:01:00.0
[ 1.171340] hub 2-0:1.0: USB hub found
[ 1.171428] hub 2-0:1.0: 4 ports detected
[ 1.172912] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 1.173254] dwc_otg: FIQ enabled
[ 1.173266] dwc_otg: NAK holdoff enabled
[ 1.173279] dwc_otg: FIQ split-transaction FSM enabled
[ 1.173294] Module dwc_common_port init
[ 1.173757] usbcore: registered new interface driver uas
[ 1.173878] usbcore: registered new interface driver usb-storage
[ 1.174091] mousedev: PS/2 mouse device common for all mice
[ 1.175971] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[ 1.179502] sdhci: Secure Digital Host Controller Interface driver
[ 1.179516] sdhci: Copyright(c) Pierre Ossman
[ 1.180168] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe
[ 1.180771] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.184645] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.184960] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.185148] usbcore: registered new interface driver usbhid
[ 1.185161] usbhid: USB HID core driver
[ 1.186252] vchiq: vchiq_init_state: slot_zero = (ptrval)
[ 1.188219] [vc_sm_connected_init]: start
[ 1.197914] [vc_sm_connected_init]: end - returning 0
[ 1.200138] Initializing XFRM netlink socket
[ 1.200177] NET: Registered protocol family 17
[ 1.200282] Key type dns_resolver registered
[ 1.200739] Registering SWP/SWPB emulation handler
[ 1.201105] registered taskstats version 1
[ 1.201125] Loading compiled-in X.509 certificates
[ 1.201668] Key type ._fscrypt registered
[ 1.201682] Key type .fscrypt registered
[ 1.212850] uart-pl011 fe201000.serial: cts_event_workaround enabled
[ 1.212949] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 29, base_baud = 0) is a PL011 rev2
[ 1.219136] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[ 1.220160] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0
[ 1.220176] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated
[ 1.266452] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 1.268111] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 1.269778] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 1.272748] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 1.274976] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 1.281838] mmc0: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using ADMA
[ 1.284899] of_cfs_init
[ 1.285171] of_cfs_init: OK
[ 1.286299] Waiting for root device PARTUUID=00fe0b43-02...
[ 1.314110] random: fast init done
[ 1.340958] mmc1: new high speed SDIO card at address 0001
[ 1.533190] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[ 1.715811] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21
[ 1.715830] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.715847] usb 1-1: Product: USB2.0 Hub
[ 1.717673] hub 1-1:1.0: USB hub found
[ 1.717977] hub 1-1:1.0: 4 ports detected
[ 1.863698] usb 2-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[ 1.896753] usb 2-1: New USB device found, idVendor=05e3, idProduct=0626, bcdDevice= 6.54
[ 1.896770] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.896786] usb 2-1: Product: USB3.1 Hub
[ 1.896802] usb 2-1: Manufacturer: GenesysLogic
[ 1.900184] hub 2-1:1.0: USB hub found
[ 1.900609] hub 2-1:1.0: 4 ports detected
[ 2.043226] usb 1-1.1: new high-speed USB device number 3 using xhci_hcd
[ 2.176533] usb 1-1.1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice= 6.54
[ 2.176550] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.176566] usb 1-1.1: Product: USB2.1 Hub
[ 2.176581] usb 1-1.1: Manufacturer: GenesysLogic
[ 2.178440] hub 1-1.1:1.0: USB hub found
[ 2.178811] hub 1-1.1:1.0: 4 ports detected
[ 2.273670] usb 2-1.4: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd
[ 2.304851] usb 2-1.4: New USB device found, idVendor=174c, idProduct=1153, bcdDevice= 0.01
[ 2.304869] usb 2-1.4: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 2.304884] usb 2-1.4: Product: AS2115
[ 2.304899] usb 2-1.4: Manufacturer: ASMedia
[ 2.304914] usb 2-1.4: SerialNumber: 00000000000000000000
[ 2.308959] usb-storage 2-1.4:1.0: USB Mass Storage device detected
[ 2.309648] scsi host0: usb-storage 2-1.4:1.0
[ 2.403186] usb 1-1.3: new low-speed USB device number 4 using xhci_hcd
[ 2.569467] usb 1-1.3: New USB device found, idVendor=04d9, idProduct=1603, bcdDevice= 3.10
[ 2.569485] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.569501] usb 1-1.3: Product: USB Keyboard
[ 2.569517] usb 1-1.3: Manufacturer:
[ 2.596729] input: USB Keyboard as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:04D9:1603.0001/input/input0
[ 2.653185] usb 1-1.1.3: new high-speed USB device number 5 using xhci_hcd
[ 2.664269] hid-generic 0003:04D9:1603.0001: input,hidraw0: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:01:00.0-1.3/input0
[ 2.692503] input: USB Keyboard System Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:04D9:1603.0002/input/input1
[ 2.753492] input: USB Keyboard Consumer Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:04D9:1603.0002/input/input2
[ 2.753819] hid-generic 0003:04D9:1603.0002: input,hidraw1: USB HID v1.10 Device [ USB Keyboard] on usb-0000:01:00.0-1.3/input1
[ 2.804287] usb 1-1.1.3: New USB device found, idVendor=0bda, idProduct=818b, bcdDevice= 2.00
[ 2.804304] usb 1-1.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.804320] usb 1-1.1.3: Product: 802.11n NIC
[ 2.804336] usb 1-1.1.3: Manufacturer: Realtek
[ 2.804351] usb 1-1.1.3: SerialNumber: 1CBFCEBA93EC
[ 2.903187] usb 1-1.4: new low-speed USB device number 6 using xhci_hcd
[ 3.041413] usb 1-1.4: New USB device found, idVendor=093a, idProduct=2510, bcdDevice= 1.00
[ 3.041431] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.041446] usb 1-1.4: Product: USB Optical Mouse
[ 3.041462] usb 1-1.4: Manufacturer: PixArt
[ 3.051402] input: PixArt USB Optical Mouse as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:093A:2510.0003/input/input3
[ 3.051909] hid-generic 0003:093A:2510.0003: input,hidraw2: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:01:00.0-1.4/input0
[ 3.354021] scsi 0:0:0:0: Direct-Access ASMT 2115 0 PQ: 0 ANSI: 6
[ 3.355040] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB)
[ 3.355787] sd 0:0:0:0: [sda] Write Protect is off
[ 3.355805] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
[ 3.356690] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.360110] sda: sda1 sda2
[ 3.363413] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.438767] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 3.438849] VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
[ 3.440273] devtmpfs: mounted
[ 3.449054] Freeing unused kernel memory: 2048K
[ 3.473505] Run /sbin/init as init process
[ 3.773867] systemd[1]: System time before build time, advancing clock.
[ 3.852476] NET: Registered protocol family 10
[ 3.854067] Segment Routing with IPv6
[ 3.879884] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 3.880719] systemd[1]: Detected architecture arm.
[ 3.937760] systemd[1]: Set hostname to <openplotter>.
[ 4.726791] random: systemd: uninitialized urandom read (16 bytes read)
[ 4.738507] random: systemd: uninitialized urandom read (16 bytes read)
[ 4.738604] systemd[1]: Reached target Swap.
[ 4.739085] random: systemd: uninitialized urandom read (16 bytes read)
[ 4.739427] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 4.740217] systemd[1]: Listening on Syslog Socket.
[ 4.740908] systemd[1]: Listening on udev Kernel Socket.
[ 4.741318] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 4.749058] systemd[1]: Started openplotter-pypilot-read.
[ 4.751488] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 4.908301] Driver for 1-wire Dallas network protocol.
[ 4.951743] i2c /dev entries driver
[ 5.924284] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 6.029500] systemd-journald[117]: Received request to flush runtime journal from PID 1
[ 7.053959] rpivid-mem feb00000.hevc-decoder: rpivid-hevcmem initialised: Registers at 0xfeb00000 length 0x00010000
[ 7.054812] rpivid-mem feb10000.rpivid-local-intc: rpivid-intcmem initialised: Registers at 0xfeb10000 length 0x00001000
[ 7.066331] rpivid-mem feb20000.h264-decoder: rpivid-h264mem initialised: Registers at 0xfeb20000 length 0x00010000
[ 7.066816] rpivid-mem feb30000.vp9-decoder: rpivid-vp9mem initialised: Registers at 0xfeb30000 length 0x00010000
[ 7.094391] spi-bcm2835 fe204000.spi: chipselect 0 already in use
[ 7.094424] spi_master spi0: spi_device register error /soc/spi@7e204000/spidev@0
[ 7.094448] spi_master spi0: Failed to create SPI device for /soc/spi@7e204000/spidev@0
[ 7.099847] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
[ 7.104878] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
[ 7.104903] [vc_sm_connected_init]: start
[ 7.105741] [vc_sm_connected_init]: installed successfully
[ 7.156319] mc: Linux media interface: v0.10
[ 7.202040] videodev: Linux video capture interface: v2.00
[ 7.212915] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[ 7.254798] bcm2835_audio bcm2835_audio: card created with 4 channels
[ 7.264344] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[ 7.266206] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[ 7.301429] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned.
[ 7.307522] bcm2835_audio bcm2835_audio: card created with 4 channels
[ 7.308870] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
[ 7.325483] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
[ 7.353337] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13
[ 7.356024] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14
[ 7.358854] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15
[ 7.359291] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16
[ 7.359327] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
[ 7.359349] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
[ 7.359370] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
[ 7.359402] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
[ 7.359641] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp
[ 7.445587] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
[ 7.445639] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
[ 7.463287] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
[ 7.463331] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
[ 7.525023] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
[ 7.525065] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
[ 7.541930] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 7.782571] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 7.787053] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 8.009062] 8192eu: loading out-of-tree module taints kernel.
[ 8.023517] brcmfmac: F1 signature read @0x18000000=0x15264345
[ 8.033909] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 8.035012] usbcore: registered new interface driver brcmfmac
[ 8.056465] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.txt failed with error -2
[ 8.263221] random: crng init done
[ 8.263238] random: 7 urandom warning(s) missed due to ratelimiting
[ 8.323330] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 8.347902] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Mar 23 2020 02:19:54 version 7.45.206 (r725000 CY) FWID 01-88ee44ea
[ 8.603123] brcmfmac mmc1:0001:1 wlan9: renamed from wlan0
[ 9.062882] usbcore: registered new interface driver rtl8192eu
[ 11.436333] Loading /home/pi/moitessier/modules/moitessier_5.4.79-v7l+.ko
[ 11.461599] uart-pl011 fe201000.serial: no DMA platform data
[ 11.912572] 8021q: 802.1Q VLAN Support v1.8
[ 12.733525] Adding 102396k swap on /var/swap. Priority:-2 extents:4 across:151548k FS
[ 14.653307] moitessier: Setting owner for /dev/moitessier.tty.
[ 14.657168] moitessier: Setting access mode for /dev/moitessier.tty.
[ 14.681672] moitessier: moitessier.shutdown.service not running. Starting service now.
[ 14.823573] IPv6: ADDRCONF(NETDEV_CHANGE): wlan9: link becomes ready
[ 14.879004] moitessier_processReqData - HEADER_payloadIsValid(...) failed
[ 14.900196] moitessier: started /home/pi/moitessier/scripts/system_shutdown
[ 14.927620] moitessier_processReqData - HEADER_payloadIsValid(...) failed
[ 14.950958] moitessier: PID shutdown=832
[ 14.968360] bcmgenet: Skipping UMAC reset
[ 14.971347] bcmgenet fd580000.ethernet: configuring instance for external RGMII
[ 14.972100] bcmgenet fd580000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[ 14.972122] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 16.731766] fuse: init (API version 7.31)
[ 18.450798] Bluetooth: Core ver 2.22
[ 18.450848] NET: Registered protocol family 31
[ 18.450854] Bluetooth: HCI device and connection manager initialized
[ 18.450867] Bluetooth: HCI socket layer initialized
[ 18.450876] Bluetooth: L2CAP socket layer initialized
[ 18.450891] Bluetooth: SCO socket layer initialized
[ 18.478302] Bluetooth: HCI UART driver ver 2.3
[ 18.478314] Bluetooth: HCI UART protocol H4 registered
[ 18.478379] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 18.478527] Bluetooth: HCI UART protocol Broadcom registered
[ 18.504419] i2c i2c-1: new_device: Instantiated device ds2482 at 0x18
[ 18.614925] w1_master_driver w1_bus_master1: Attaching one wire slave 28.3c01d60717eb crc 75
[ 18.708398] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 18.865310] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 18.865317] Bluetooth: BNEP filters: protocol multicast
[ 18.865332] Bluetooth: BNEP socket layer initialized
[ 18.918281] Bluetooth: RFCOMM TTY layer initialized
[ 18.918297] Bluetooth: RFCOMM socket layer initialized
[ 18.918312] Bluetooth: RFCOMM ver 1.11
[ 22.647645] i2c i2c-1: delete_device: Deleting device ds2482 at 0x18
[ 22.687696] i2c i2c-1: new_device: Instantiated device ds2482 at 0x18
[ 22.753985] w1_master_driver w1_bus_master1: Attaching one wire slave 28.3c01d60717eb crc 75
[ 806.931590] can: controller area network core (rev 20170425 abi 9)
[ 806.931974] NET: Registered protocol family 29
[ 806.941551] can: raw protocol (rev 20170425)
Comet 1000 - Openplotter under construction
Posts: 181
Threads: 4
Joined: May 2018
Reputation:
28
2020-12-17, 09:47 AM
(This post was last modified: 2020-12-17, 09:52 AM by Sailoog.)
The best way to use the MCS is directly in signalK, with the SignalK plugin. It is also easyer because you don´t need the UDP connections...
I know, there is something change at the CE Channels from Sailoog in the CAN App. Don´t know what...
Try a different CE channel?
Posts: 3,013
Threads: 62
Joined: Mar 2016
Reputation:
282
Nothing changed in mcp2515 management.
Try removing the device and create it again.
What do you have in /boot/config.txt? look for a line like this: dtoverlay=mcp2515...
Posts: 181
Threads: 4
Joined: May 2018
Reputation:
28
2020-12-17, 11:47 AM
(This post was last modified: 2020-12-17, 11:54 AM by glowntiger.)
Hi Sailoog,
I have recently read some comments about the CE designation being changed. So far I haven't looked at it myself ...
I think it happens since this commit...:
https://github.com/openplotter/openplott...5fc9e54d9c
Posts: 47
Threads: 1
Joined: Feb 2020
Reputation:
0
(2020-12-17, 09:58 AM)Sailoog Wrote: Nothing changed in mcp2515 management.
Try removing the device and create it again.
What do you have in /boot/config.txt? look for a line like this: dtoverlay=mcp2515...
Yes, in config I have the dtoverlay=mcp2515...
Comet 1000 - Openplotter under construction
Posts: 3,013
Threads: 62
Joined: Mar 2016
Reputation:
282
Try removing the device and create it again, if it does not work show me the complete line dtoverlay=mcp2515...
Posts: 181
Threads: 4
Joined: May 2018
Reputation:
28
Further make a screenshot or copy the content of:
sudo nano /etc/network/interfaces.d/can0
|