(2019-09-12, 03:37 PM)rastam4n Wrote:(2019-09-12, 12:26 PM)PaddyB Wrote: Or if sigK is working could you add an input type 0183, source serial?
This does not seem to work, says it cannot read property 'pipe' of undefined
Only way I have been able to get it to work is to add a serial connection withing opencpn, would love to get this working in OP
For me it worked nicely (my usb gps is an Ublox-8) :
- in SK : Added one connection, input type NMEA, Enabled Yes, Logging YES, serial port : /dev/ttyACM0, Baud rate : 9600, Validate checksum Yes, Apply, Restart ;
- Then added in OpenCPN Options, tab Connection, Add Connection, network, input, TCP, Address : 10.10.10.1:10110, port 2927, priority 1, OK, and worked perfectly ...
Cordialement
Didier B
Pi4, SSD USB3, OP 3.0 Touch SK 3.2.1 OpenCPN 5.8.4 : Thank you Thank you Thank you
Didier B
Pi4, SSD USB3, OP 3.0 Touch SK 3.2.1 OpenCPN 5.8.4 : Thank you Thank you Thank you