2019-09-13, 04:22 PM
Remove all connections you have in opencpn. You have to have only this connection:
network
TCP
address: localhost
port 10110
input
You do not need gpsd at all.
Then, in SK be sure your GPS is working at 4800 bauds and that the system has assigned /dev/ttyUSB0 to your device. Unplug any USB serial device to be sure of this.
network
TCP
address: localhost
port 10110
input
You do not need gpsd at all.
Then, in SK be sure your GPS is working at 4800 bauds and that the system has assigned /dev/ttyUSB0 to your device. Unplug any USB serial device to be sure of this.