Raspberry Pi 4 released!

[MatsA]

The logical in OP2 for serial connections is the same than OP1, forget OpenCPN connections! You only need to have there the connection with SK (NMEA 0183 - TCP localhost:10110).

In OP1 we had serial tab to define serial devices and it was creating a connection in SK silently for users.
In OP2 we will have the serial app to define the serial devices (udev rules) but all serial ant network connections must be done in SK. It does not make sense doing this silently because now the SK interface is more than acceptable and users should be aware of this.

Hi, I've tried all the ways, everything works fine, but I can't configure the gps on usb and make it read signalK. I look forward to seeing that OP 2 is complete. Great anyway and good. Good job !

But you should be able to do it because OP2  serial app will no make any difference for this. What happens with your GPS an SK, any error?

Yah I am having similar challenges

1. in opencpn localhost and port 10110 for gpsd is producing no data stream... although I am not sure what data it would see without being able to setup SK the gps in SK
2. in SK the connections only produce errors 
screen shots attached

Hi ! in the empty box, in SignalK, to the right You must write /dev/ttyUSB0  The drop down list just shows You the available values. Not Cristal clear ;-)

---

A really good explanation how OP works is available at this link 

https://docs.sailoog.com/openplotter-v1-...es-it-work

from the 1.2 documentation.

Updated my blogpost, at the end of the post for Beta V2 install, with the connection between OpenCPN and SignalK

https://pysselilivet.blogspot.com/2019/0...guide.html

Maybe it should be added by default by the install programs ?