2019-12-13, 10:44 PM
(2019-12-13, 10:35 PM)NahanniV Wrote:(2019-12-13, 10:13 PM)verkerkbr Wrote: Just received the new Argon case with two pillars to be connected to the processors. Nice case. Works very well shutting down via the button also switches off the power.
Installed the SignalK temperature in MX Tommy Kip. The processor temp is hovering around 40o C, Is about 5o C better then the Flirc Case, also alu with a cooling pillar.
Fixed mounting is even as the Flirc case not so easy. With the Flirc case I have done this. See image.
Bram
Is the fan running in the Argon case to get the temp to 40Deg.C ?
Hardly a fair comparison since the FLIRC has no fan.
I wish someone would create a case like the Argon, with all the connectors on the bottom, but drip-proof and easily wall mountable. And including a barometric sensor, IMU, screw terminals for I/O (1-Wire, Serial, ...).
No, the fan is not running. Starts running at 60o C with a power of 10%.
Can be adjusted by the user with the software, which is easy to install.
Regards,
Bram