Did another trial by upgrading the OpenPlotter version first with the latest Raspian Stretch updates. Then I changed the server adresses from Stretch to Buster.
Quit a long update. But the result is that OpenPlotter works very well with this Buster version on a RPI3B+. SDR AIS is also still working.
OpenCPN with Oesenc charts with the Oesenc dongle ( former fingerprint does of course no longer work).
Node Red is working.
Only SignalK does not work from the browser page. However if I look at the Kplex SignalK diagnostics I see the Nmea sentences and also SignalK passing by. SignalK has 30330 as port adress ?
In OpenCPN the port adress 30330 works. If I use a browser on an another system with ip-adress:30330 then the nmea sentences are working. But not the SignalK page.
There is something changed in the adresses of SignalK. What has been changend ?
But everything seems to work and the Buster OS works very well. What is the wait to bring out the OP 2.00 with Buster ?
Regards,
Bram
Quit a long update. But the result is that OpenPlotter works very well with this Buster version on a RPI3B+. SDR AIS is also still working.
OpenCPN with Oesenc charts with the Oesenc dongle ( former fingerprint does of course no longer work).
Node Red is working.
Only SignalK does not work from the browser page. However if I look at the Kplex SignalK diagnostics I see the Nmea sentences and also SignalK passing by. SignalK has 30330 as port adress ?
In OpenCPN the port adress 30330 works. If I use a browser on an another system with ip-adress:30330 then the nmea sentences are working. But not the SignalK page.
There is something changed in the adresses of SignalK. What has been changend ?
But everything seems to work and the Buster OS works very well. What is the wait to bring out the OP 2.00 with Buster ?
Regards,
Bram