2019-07-01, 01:39 PM
(2019-07-01, 01:27 AM)Opie91 Wrote: Are you using the MQTT tab to subscribe and convert to signal K? If so I had the same exact problem, once you subscribe to more than two items the MQTT server goes crazy.
You can accomplish the same thing in node red without all the problems.
I want to use the signal k for WilhelmSK application in my iPad
But again it sending the value with inverted commas !
See below :Connection Log:
Config: Host: 192.168.0.124 Port: 3000 REST: http http://192.168.0.124:3000/signalk/v1/api/ WS: ws://192.168.0.124:3000/signalk/v1/stream SSL: NO
Connecting to websockets with ws://192.168.0.124:3000/signalk/v1/stream?stream=delta&subscribe=all
Sent GET http://192.168.0.124:3000/signalk 200
Received json: {
endpoints = {
v1 = {
"signalk-http" = "http://192.168.0.124:3000/signalk/v1/api/";
"signalk-tcp" = "tcp://192.168.0.124:8375";
"signalk-ws" = "ws://192.168.0.124:3000/signalk/v1/stream";
version = "1.16.0";
};
};
server = {
id = "signalk-server-node";
version = "1.16.0";
};
}
Vessel Data:
{
"environment" : {
"outside" : {
"humidity" : {
"meta" : {
"units" : "ratio",
"description" : "Current outside air relative humidity"
},
"value" : "0.332000",
"$source" : "OPnotifications.MQTT.humidite",
"timestamp" : "2019-06-30T21:14:54.102Z",
"values" : {
"OPnotifications.MQTT.humidite" : {
"value" : "0.332000",
"timestamp" : "2019-06-30T21:14:54.102Z"
}
Any idea to release the inverted commas in the stream ?
Thanks