This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
On the compass calibration
#2
did you calibrate the compass?

https://docs.sailoog.com/openplotter-v1-...alibration

also if you look under the imu tab in the calibration window there is a spot for heading offset.
Granted this seems to be somewhat of moving target for me atm, I have it zeroed in one way then go the other way and have to adjust it again... not sure what may cause this... and my boat is aluminum!
Reply


Messages In This Thread
On the compass calibration - by ironman - 2019-07-30, 04:52 PM
RE: On the compass calibration - by rastam4n - 2019-07-30, 07:49 PM
RE: On the compass calibration - by ironman - 2019-07-30, 11:56 PM
RE: On the compass calibration - by seandepagnier - 2019-07-31, 01:52 PM
RE: On the compass calibration - by ironman - 2019-07-31, 05:43 PM
RE: On the compass calibration - by seandepagnier - 2019-08-02, 05:08 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)